共 23 条
- [21] Puska E., APROS couplings from core to containment, (2005)
- [22] Hanninen M., Phenomenological extensions to APROS six-equation model, (2009)
- [23] Laakso P., Methods of simulation assisted automation testing, (2005)
Characteristic Model of Combined Governing Valve and Governing Stage and Optimization of Steam Distribution of Steam Turbine
被引：2
|作者：
Zhang H.
[1
]
Xu J.
[1
]
Sun Y.
[2
]
Huang X.
[1
]
Chen X.
[1
]
Huangfu Z.
[1
]
Zhou L.
[1
]
机构：
[1] Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University, Nanjing
[2] Huadian EIectric Power Research Institute, Hangzhou
来源：
关键词：
Governing stage;
Governing valve;
Optimization of steam distribution;
The combination flow characteristics;
Varying condition;
D O I：
10.3901/JME.2019.18.165
中图分类号：
学科分类号：
摘要：
For the nozzle steam turbine, the combined flow characteristics calculation model of governing valve and governing stage is established by calculation, and tested with open literature experimental data. The accurate flow of the governing valve can be calculated with the model by using the combination pressure ratio and the valve opening, which is convenient for engineering application. Method a calculation model for the off-design performance of a 300 MW steam turbine unit based on the combined valve model, and the valve distribution function is optimized, and the flow character of the sequential valve is obtained. Then the steam distribution optimization is analyzed by using the load and valve position. Analysis shows that the combined flow characteristics calculation model of governing valve and governing stage can reflect the characteristics of the valve accurately. According to the model, the flow characteristic is optimized, the reasonable overlap degree is obtained. The optimal slip pressure curve of the unit is obtained, which reduce the heat consumption during low-load operation of the unit and improves the flexibility and peak-regulating capacity of the unit and provides the theoretical basis for optimization test. © 2019 Journal of Mechanical Engineering.
引用
收藏
页码：165 / 172
页数：7
相关论文