Study of double rocker five-axis machine tool's RTCP errors based on the multi-body theory

被引：0
|
作者：
Fan, Jin-Wei [1 ]
Wang, Xiao-Feng [1 ]
Wang, Chen-Xin [1 ]
Song, Bei-Bei [1 ]
机构：
[1] College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China
来源：
Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology | 2012年 / 38卷 / 05期
关键词：
Computer control systems - Machining - Machine tools - Error analysis - Computer software - Error compensation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
To improve the machining accuracy of five-axis NC machine tools, this paper analyzes the RTCP errors of five-axis machine tools with dual head. The error analysis model is established based on the basic theory of a multi-body system and six-degrees of freedom of the rigid body. RTCP errors of tool center point and tool vector are deeply analyzed. The error formulas of tool center point and tool vector are deduced. By comparing the ideal and actual cutter path that are generated by tool path simulation software, the model is demonstrated to be correct. The study provides fundamental theory for error compensation and error analysis.
引用
收藏
页码：658 / 662
相关论文
共 50 条
  • [31] Identification of Kinematic Errors of Five-axis Machine Tool Trunnion Axis from Finished Test Piece
    ZHANG Ya
    FU Jianzhong
    CHEN Zichen
    Chinese Journal of Mechanical Engineering, 2014, 27 (05) : 999 - 1007
  • [32] Research on detection of the linkage performance for five-axis CNC machine tools based on RTCP trajectories combination
    Zhong Jiang
    Jiexiong Ding
    Jing Zhang
    Qichen Ding
    Qingzhao Li
    Li Du
    Wei Wang
    The International Journal of Advanced Manufacturing Technology, 2019, 100 : 941 - 962
  • [33] A Innovative RTCP Detection Method for Five-Axis Machine Tools Based on The Serial Length Ball Bars
    Yang, Huihao
    Du, Li
    Ding, Jiexiong
    Wang, Xiaodong
    Jia, Huishu
    Bao, Pengchao
    Ji, An
    2024 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, ICMA 2024, 2024, : 1068 - 1073
  • [34] Research on detection of the linkage performance for five-axis CNC machine tools based on RTCP trajectories combination
    Jiang, Zhong
    Ding, Jiexiong
    Zhang, Jing
    Ding, Qichen
    Li, Qingzhao
    Du, Li
    Wang, Wei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 100 (1-4): : 941 - 962
  • [35] Sensitivity analysis of geometric errors of two-turntable five-axis machine tool based on S-shaped specimens
    Shi Wu
    Zhengdong Fan
    Xianli Liu
    Yupeng Wang
    The International Journal of Advanced Manufacturing Technology, 2022, 121 : 3731 - 3745
  • [36] Sensitivity analysis of geometric errors of two-turntable five-axis machine tool based on S-shaped specimens
    Wu, Shi
    Fan, Zhengdong
    Liu, Xianli
    Wang, Yupeng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (5-6): : 3731 - 3745
  • [37] Identification and Measurement of Geometric Errors for a Five-axis Machine Tool with a Tilting Head using a Double Ball-bar
    Lee, Dong-Mok
    Zhu, Zankun
    Lee, Kwang-Il
    Yang, Seung-Han
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2011, 12 (02) : 337 - 343
  • [38] Identification and measurement of geometric errors for a five-axis machine tool with a tilting head using a double ball-bar
    Dong-Mok Lee
    Zankun Zhu
    Kwang-Il Lee
    Seung-Han Yang
    International Journal of Precision Engineering and Manufacturing, 2011, 12 : 337 - 343
  • [39] Control scheme for a five-axis machine tool based on coordinate transformation
    Lo, CC
    JSME INTERNATIONAL JOURNAL SERIES C-MECHANICAL SYSTEMS MACHINE ELEMENTS AND MANUFACTURING, 1997, 40 (03): : 477 - 483
  • [40] Kinematic error separation on five-axis NC machine tool based on telescoping double ball bar
    Wang M.
    Hu J.
    Zan T.
    Frontiers of Mechanical Engineering in China, 2010, 5 (4): : 431 - 437
12345