Experimental study on static and dynamic compression mechanical properties of filled rock joints

被引:0
|
作者
Chai, Shaobo [1 ,2 ,3 ]
Wang, Hao [1 ]
Yu, Liyuan [2 ]
Shi, Jiehui [1 ]
Abi, Erdi [3 ]
机构
[1] School of Civil Engineering, Chang’ an University, Xi’an,710064, China
[2] State Key Laboratory for GeoMechanics and Deep Underground Engineering, China University of Mining & Technology, Xuzhou,221116, China
[3] School of River & Ocean Engineering, Chongqing Jiaotong University, Chongqing,400045, China
关键词
The static and dynamic compression mechanical properties of the prefabricated artificial filled rock joints specimens with different fillings and different joint thicknesses are tested; respectively; Then; the strength; deformation; wave propagation and energy dissipation laws of the filled joints are analyzed. The experimental results show that the static and dynamic compression strength of filled joints increases with the strength of filling materials while decreases with the filling thickness. The deformation characteristics of filled joints under static and dynamic compression are positively correlated with the properties of filling materials and the thickness of filled joints. With the increasing of the filling thickness; the reflection coefficient increases while the transmission coefficient decreases. With the increase of the strength of the fillings; the reflection coefficient decreases while the transmission coefficient increases. The energy dissipation ratio decreases with the increase of the filliing thickness and increases with the increase of the strength of the filling material. © 2020 Hampstead Psychological Associates. All rights reserved;
D O I
暂无
中图分类号
学科分类号
摘要
引用
收藏
相关论文
共 50 条
  • [21] Dynamic and static rock mechanical properties of heavy oil sandstones
    Rabe, C.
    Perdomo, P.
    Cherrez, J.
    ROCK MECHANICS FOR RESOURCES, ENERGY AND ENVIRONMENT, 2013, : 325 - 329
  • [22] Experimental study on the influence of height and dip angle of asperity on the mechanical properties of rock joints
    Ma, Hao
    Tian, Yongchao
    Liu, Quansheng
    Pan, Yucong
    BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT, 2021, 80 (01) : 443 - 471
  • [23] Experimental study on the influence of height and dip angle of asperity on the mechanical properties of rock joints
    Hao Ma
    Yongchao Tian
    Quansheng Liu
    Yucong Pan
    Bulletin of Engineering Geology and the Environment, 2021, 80 : 443 - 471
  • [24] Experimental Study of Mechanical Properties of Bamboo's Joints under Tension and Compression Load
    Fu, Yuguang
    Wang, Mingyuan
    Ge, Haibo
    Li, Lu
    TRENDS IN BUILDING MATERIALS RESEARCH, PTS 1 AND 2, 2012, 450-451 : 749 - +
  • [25] Photoelastic study on the mechanical properties of fractal rock joints
    Xie, HP
    Xie, WH
    Zhao, P
    FRACTALS-AN INTERDISCIPLINARY JOURNAL ON THE COMPLEX GEOMETRY OF NATURE, 1996, 4 (04): : 521 - 531
  • [26] Experimental Study on Dynamic and Static Mechanical Properties of Coarse-grained Soil Filled in High-speed Railway Subgrade
    Wang T.
    Zhang F.
    Song H.
    Bu J.
    Yin Z.
    Tiedao Xuebao/Journal of the China Railway Society, 2022, 44 (04): : 127 - 135
  • [27] Experimental study of mechanical properties of coal rock containing gas under uniaxial compression
    Zhao, Hong-Bao
    Li, Zhen-Hua
    Zhong, Shu-Heng
    Luo, Ye
    Caikuang yu Anquan Gongcheng Xuebao/Journal of Mining and Safety Engineering, 2010, 27 (01): : 131 - 134
  • [28] Experimental Study on Uniaxial Compression Failure Characteristics and Mechanical Properties of Composite Aquiclude Rock
    Sun, Qiang
    Zhao, Rui
    Li, Xiaolong
    Yuan, Hui
    GEOFLUIDS, 2024, 2024
  • [29] Intact rock triaxial compression strength properties of Soma marls with calcite filled joints, in Turkey
    Emir, E.
    Beyhan, S.
    ROCK MECHANICS IN CIVIL AND ENVIRONMENTAL ENGINEERING, 2010, : 67 - +
  • [30] Experimental investigations of static mechanical properties and failure characteristics of damaged diorite after dynamic triaxial compression
    Zhu, Quanqi
    Li, Xibing
    Li, Diyuan
    Ma, Chunde
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2022, 153