Study of design method for the zero-stage compressor in an expendable gas turbine engine

被引：0
|
作者：
The 31st Research Institute, CASIC, Beijing 100074, China [1 ]
不详 [2 ]
机构：
来源：
Hangkong Dongli Xuebao | 2006年 / 6卷 / 1098-1102期
关键词：
Computational fluid dynamics - Gas turbines - Propulsion;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Analyzing the evolvement from TRI60-2 engine to TRI60-20 engine developed by France MicroTurbo Inc, the technical characteristic and design method of adding zero-stage compressor were researched. Taking obtaining the compressor's structure and characteristics as the primary concern, the process of adding zero-stage compressor was discussed, and using CFD software validated by test data the flow field was numerically simulated in full three dimensions and analyzed through computation. The result indicates that the method of adding zero-stage compressor discussed in this paper is basically successful.
引用
收藏
相关论文
共 50 条
  • [21] SPLIT COMPRESSOR DIFFERENTIAL GAS TURBINE ENGINE FOR VEHICLE PROPULSION
    DOYLE, GN
    WILKINSO.TS
    JOURNAL OF ENGINEERING FOR POWER, 1967, 89 (01): : 49 - &
  • [22] Erosion Damage to Last-Stage Compressor Disk of a Heavy-duty Gas Turbine Engine
    Neidel, Andreas
    Gaedicke, Tobias
    Wallich, Sebastian
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2015, 52 (10): : 607 - 614
  • [23] Failure analysis of blades and vanes of a compressor for a gas turbine engine
    Kwon, Hyeok-Jun
    Lee, Dooyoul
    Lee, Young-Kook
    ENGINEERING FAILURE ANALYSIS, 2021, 124
  • [24] SPLIT COMPRESSOR DIFFERENTIAL GAS TURBINE ENGINE FOR VEHICLE PROPULSION
    DOYLE, GN
    WILKINSO.TS
    PARSONS, CA
    MECHANICAL ENGINEERING, 1966, 88 (06) : 70 - &
  • [25] CYCLE SELECTION AND COMPRESSOR DESIGN OF 600kW SIMPLE CYCLE GAS TURBINE ENGINE
    Nascimento, Marco A. R.
    Venturini, Osvaldo J.
    Lora, Electo S.
    Sierra, Guido A.
    Rodrigues, Lucilene O.
    Carvalho, Hilario M.
    Moura, Newton R.
    PROCEEDINGS OF THE ASME TURBO EXPO 2008, VOL 1, 2008, : 917 - 923
  • [26] Estimation of cooling flow rate for conceptual design stage of a gas turbine engine
    Filinov, E. P.
    Kuz'michev, V. S.
    Yu Tkachenko, A.
    Ostapyuk, YaA
    Krupenich, I. N.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY, 2021, 235 (08) : 2014 - 2021
  • [27] Research on the flow path design method of axial flow compressor of gas turbine
    Sheng, D. (shengdr@zju.edu.cn), 1600, Chinese Society for Electrical Engineering (32):
  • [28] RATIONAL DESIGN OF GAS TURBINE ENGINE COMPRESSOR TO PROVIDE THE REQUIRED DYNAMIC STRENGTH LEVEL OF ROTOR BLADES
    Kolmakova, Dania
    Popov, Grigorii
    Shklovets, Aleksandr
    Ermakov, Aleksandr
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 7A, 2016,
  • [29] A LARGE DESIGN SPACE MULTIDISCIPLINARY OPTIMIZATION OF A MIXED FLOW MICRO GAS TURBINE COMPRESSOR STAGE
    Ochabski, Thomas
    van der Spuy, Johan
    Hildebrandt, Thomas
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 8, 2020,
  • [30] Impact of surface roughness on gas turbine engine fan and compressor rotor
    Malhotra, Ashima
    Goswami, Shraman
    Pradeep, A. M.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2023, 37 (05) : 2171 - 2177
12345