Preparation and characterization of high-impact polystyrene using different types of polybutadiene

被引：0
|
作者：
Coutinho, F.M.B. [1 ]
Costa, M.P.M. [1 ]
Guimarães, M.J.O.C. [2 ]
Soares, B.G. [3 ]
机构：
[1] Departamento de Processos Químicos, Instituto de Química, UERJ, RJ, Brazil
[2] Departamento de Processos Orgânicos, Escola de Química, UFRJ, RJ, Brazil
[3] Instituto de Macromoléculas Professora Eloisa Mano, UFRJ, RJ, Brazil
来源：
Journal of Applied Polymer Science | 2008年 / 108卷 / 01期
关键词：
The mechanical; morphological; and Theological properties of polymer blends based on polystyrene (PS) and three different types of polybutadiene (PB) were studied. The polymer blends containing 20% of PB were processed in a Haake mixer at 180°C and 60 rpm for 6 min. The materials exhibited impact strength superior to that of the PS. An increase was observed in the impact strength of 138; 208; and; 823%; when low-cis polybutadiene (PB1); high-cis polybutadiene (PBh); and styrene-butadiene block copolymer (PB co); were respectively used. The materials presented dispersed morphology with polybutadiene domains; with sizes inferior to 1 μm; randomly distributed in the PS matrix. The viscous and storage moduli increased as the applied frequency increased. The flow activation energy; calculated by Arrhenius equation; varied from 34 to 71 kJ/mol. In the rheological experiments all polymer blends presented pseudoplastic behavior; showing decreasing viscosities as the shear rate increased. © 2007 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：406 / 413
相关论文
共 50 条
  • [31] PHOTOCHEMICAL DEGRADATION OF RECYCLED HIGH-IMPACT POLYSTYRENE
    SALMAN, SR
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 1993, 32 (1-2) : 115 - 122
  • [32] THICKNESS EFFECT ON FRACTURE IN HIGH-IMPACT POLYSTYRENE
    YAP, OF
    MAI, YW
    COTTERELL, B
    JOURNAL OF MATERIALS SCIENCE, 1983, 18 (03) : 657 - 668
  • [33] RHEOLOGICAL PROPERTIES OF HIGH-IMPACT POLYSTYRENE MELTS
    TONG, PP
    DORMIER, EJ
    JOURNAL OF ELASTOMERS AND PLASTICS, 1986, 18 (01): : 24 - 34
  • [34] Characterization of virgin and postconsumer blended high-impact polystyrene resins for injection molding
    Xu, GJ
    Qiao, JH
    Kuswanti, C
    Koelling, K
    Stuart, JA
    Lilly, B
    JOURNAL OF APPLIED POLYMER SCIENCE, 2002, 84 (01) : 1 - 8
  • [35] High-impact polystyrene grade without compromise
    Schwaben, H.-D.
    Heufel, D.
    Kunststoffe Plast Europe, 1998, 88 (12): : 2164 - 2169
  • [36] STABILIZATION OF HIGH-IMPACT POLYSTYRENE POLYETHYLENE BLENDS
    GHIDONI, D
    FASULO, GC
    MORI, F
    NOCCI, R
    JOURNAL OF MATERIALS SCIENCE, 1992, 27 (02) : 499 - 503
  • [37] STRESS-RELAXATION OF HIGH-IMPACT POLYSTYRENE
    SHINOZAKI, DM
    KLAUZNER, A
    JOURNAL OF MATERIALS SCIENCE, 1991, 26 (21) : 5865 - 5872
  • [38] RADIATION EFFECTS ON HIGH-IMPACT POLYSTYRENE.
    Gupta, M.C.
    Srirao, B.S.
    Kanphade, B.P.
    Bansod, V.P.
    Polymer communications Guildford, 1984, 25 (11): : 334 - 336
  • [39] CRAZE INITIATION AND GROWTH IN HIGH-IMPACT POLYSTYRENE
    DONALD, AM
    KRAMER, EJ
    JOURNAL OF APPLIED POLYMER SCIENCE, 1982, 27 (10) : 3729 - 3741
  • [40] Cavitation of rubber particles in high-impact polystyrene
    Yang, J
    Liu, JJ
    POLYMER JOURNAL, 2001, 33 (12) : 952 - 954
12345