Sub-surface cracks of borosilicate glass loaded by single grain of abrasive

被引：0
|
作者：
Dai, Zihua [1 ]
Zhu, Yongwei [1 ]
Ju, Zhilan [1 ]
Li, Jun [1 ]
Sun, Tao [2 ]
Zuo, Dunwen [1 ]
机构：
[1] College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing,210016, China
[2] JIANGSU SINO KRYSTALS OPTROINCS Co. Ltd., Changzhou,Jiangsu,213164, China
来源：
Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society | 2014年 / 42卷 / 09期
关键词：
Cracks - Grinding (machining) - Surface defects - Abrasives - Hydrofluoric acid;
D O I：
10.7521/j.issn.0454-5648.2014.09.13
中图分类号：
学科分类号：
摘要：
The process of single diamond grit acting on the K9 (borosilicate glass) workpiece surface in the process of grinding and polishing was simulated by Vickers indentation method. The crack depth of the surface occurred in the diamond head pressing was measured by HF acid section corrosion method. The relation between the crack depth and the load, as well as the pressing depth of the pressure head were investigated. The generation and development process of cracks under different loads were also analyzed by using ANSYS/LS-DYNA. The results show that the cracks are mainly the transverse cracks in the load range of 0.098-0.490N, the cracks are mainly the longitudinal crack in the load range of 0.49-2.94N, due to the massive cracks around a few of pit, and the subsurface cracks are mainly the longitudinal cracks in the load range of 2.94-9.80N. The depth of subsurface crack layer of K9 glass under different loads is 1.4-87.2 μm, and the crack depth predicted by numerical simulation is 3.5-107.5 μm.
引用
收藏
页码：1161 / 1166
相关论文
共 50 条
  • [1] Study on the Mechanism of Optical Glass Sub-surface Crack Formation in Single Abrasive Grinding
    Jiang, Chen
    Zhang, Feihu
    Hang, Zhao
    Yong, Zhang
    Liu, Lifei
    EMERGING TECHNOLOGY IN PRECISION ENGINEERING XIV, 2012, 523-524 : 1 - 6
  • [2] Evaluation of surface and sub-surface cracks of ground ceramic
    Maksoud, TMA
    Mokbel, AA
    Morgan, JE
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 88 (1-3) : 222 - 243
  • [3] Propagation Regularity of Sub-surface Crack in Static Indentation of Fused Silica by Single Abrasive
    Zhou, Lian
    Li, Jie
    Zhao, Shijie
    Chen, Xianhua
    Zhang, Qinghua
    Wang, Jian
    SECOND TARGET RECOGNITION AND ARTIFICIAL INTELLIGENCE SUMMIT FORUM, 2020, 11427
  • [4] Investigation of sub-surface cracks in continuous cast billets
    Das, G
    Ghosh, S
    Chowdhury, SG
    Ghosh, S
    Das, S
    Bhattacharaya, DK
    ENGINEERING FAILURE ANALYSIS, 2003, 10 (03) : 363 - 370
  • [5] MORPHOLOGY OF SUB-SURFACE CRACKS BELOW THE SCRATCH PRODUCED ON SODA LIME GLASS BY A DISK CUTTER
    HOWES, VR
    SZAMEITAT, A
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1984, 3 (10) : 872 - 874
  • [6] Decoration of glass by surface and sub-surface laser engraving
    Lenk, A
    Witke, T
    OPTICS AND LASERS IN BIOMEDICINE AND CULTURES OWLS V, 2000, 5 : 155 - 158
  • [7] Acoustic, electron and optical microscopy visualization of surface and sub-surface cracks
    Connor, ZM
    Fine, ME
    Achenbach, JD
    REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOLS 17A AND 17B, 1998, : 1581 - 1588
  • [8] NUMERICAL ANALYSIS OF THE INTERACTION OF RAYLEIGH WAVE TO THE SUB-SURFACE CRACKS
    Wang, Wei
    Pan, Yong-Dong
    Zhong, Zheng
    2013 SYMPOSIUM ON PIEZOELECTRICITY, ACOUSTIC WAVES AND DEVICE APPLICATIONS (SPAWDA), 2013, : 127 - 130
  • [9] Experimental and numerical analysis of sub-surface cracks in railway wheels
    Guagliano, M
    Vergani, L
    ENGINEERING FRACTURE MECHANICS, 2005, 72 (02) : 255 - 269
  • [10] Abrasive grain size and glass surface finish
    Entelis, F.S.
    Nazarova, V.N.
    Bogdanova, G.A.
    Glass and Ceramics (English translation of Steklo i Keramika), 1991, 48 (1-2): : 90 - 92
12345