Flow mechanisms of multi-phase multi-component CO2-crude oil system in porous media

被引:0
|
作者
Shen, Pingping [1 ]
Huang, Lei [1 ]
机构
[1] Research Institute of Petroleum Exploration and Development, Beijing 100083, China
来源
Shiyou Xuebao/Acta Petrolei Sinica | 2009年 / 30卷 / 02期
关键词
Hydrocarbons - Solvents - Petroleum reservoir engineering - Floods - Porous materials - Enhanced recovery - Oil well flooding - Petroleum reservoirs - Solubility - Crude oil - Reservoirs (water) - Carbon;
D O I
暂无
中图分类号
学科分类号
摘要
Flow mechanisms of multi-phase multi-component of CO2-crude oil system in porous media are very important for displacement process for CO2 flooding, enhanced oil recovery and even geology sequestration of CO2, etc. Phase behavior and percolation characteristics of multi-phase multi-component of CO2-crude oil system in porous media were studied by slim tube test, multi-contact test and numerical model considering mass transport. The results showed that CO2 flooding can vaporize not only the light hydrocarbons less than carbon 11, but even the heavy hydrocarbon components such as carbon 32. The displacement combined vaporizing and condensing process, and the miscible zone was just near the gas displacement front. Higher temperature and higher contents of N2 and CH4, larger the minimum miscibility pressure (MMP) was.
引用
收藏
页码:247 / 251
相关论文
共 50 条
  • [41] Numerical modelling of multi-component multi-phase flows in petroleum reservoirs with heat transfer
    Capatina, D.
    Lizaik, L.
    Terpolilli, P.
    APPLICABLE ANALYSIS, 2009, 88 (10-11) : 1509 - 1525
  • [42] Modelling of kinetics in multi-component multi-phase systems with spherical precipitates - I: Theory
    Svoboda, J
    Fischer, FD
    Fratzl, P
    Kozeschnik, E
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 385 (1-2): : 166 - 174
  • [43] Thermodynamic description of multi-component multi-phase alloys and its application to the solidification process
    He, Wanqi
    Zhang, Ruijie
    He, Zhi
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2008, 99 (06) : 632 - 637
  • [44] Multi-phase and Multi-component CFD Analysis of a Load Sensing Proportional Control Valve
    Bigliardi, E.
    Francia, M.
    Milani, M.
    Montorsi, L.
    Paltrinieri, F.
    Stefani, M.
    IFAC PAPERSONLINE, 2015, 48 (01): : 421 - 426
  • [45] Thermodynamic description of multi-component multi-phase alloys and its application to the solidification process
    Jie, Wanqi
    Zhang, Ruijie
    He, Zhi
    Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 2008, 99 (06): : 632 - 637
  • [46] Thermodynamic description of multi-component multi-phase alloys and its application to the solidification process
    Jie, WQ
    Zhang, RJ
    He, Z
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 413 : 497 - 503
  • [47] General nonlinear solution strategies for multi-phase multi-component EoS based simulation
    Stanford University, United States
    SPE Reservoir Simul. Symp. Proc., 1600, (649-663):
  • [48] MFC: An open-source high-order multi-component, multi-phase, and multi-scale compressible flow solver
    Bryngelson, Spencer H.
    Schmidmayer, Kevin
    Coralic, Vedran
    Meng, Jomela C.
    Maeda, Kazuki
    Colonius, Tim
    COMPUTER PHYSICS COMMUNICATIONS, 2021, 266
  • [49] Modelling of Compressible Multi-Component Two-Phase Flow with Multi-Component Navier Boundary Condition
    Wang, Junkai
    He, Qiaolin
    COMMUNICATIONS IN COMPUTATIONAL PHYSICS, 2024, 36 (04) : 1053 - 1089
  • [50] Quantitative phase-field simulations of growth and coarsening in polycrystalline multi-component and multi-phase materials
    Moelans, N.
    Heulens, J.
    Blanpain, B.
    Wollants, P.
    Vanherpe, L.
    Vandewalle, S.
    Rodiers, B.
    TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION, COMPUTATION AND MODELING AND ENERGY, 2010, : 399 - +