Thermal performance of a two-phase closed thermosyphon for waste heat recovery system

被引：21
|
作者：
Kannan M. [1 ]
Natarajan E. [2 ]
机构：
[1] Department of Mechanical Engineering, Adhiparasakthi Engineering College, Melmaruvathur, Tamilnadu
[2] Institute for Energy Studies, Department of Mechanical Engineering, Anna University Chennai, Chenna-600 025, Tamilnadu
来源：
Journal of Applied Sciences | 2010年 / 10卷 / 05期
关键词：
Filling ratio; Heat transfer characteristics; Heat transport capability; Thermal performance; Thermosyphon; Waste heat recovery;
D O I：
10.3923/jas.2010.413.418
中图分类号：
学科分类号：
摘要：
Performance study of a two phase closed thermosyphon was experimentally investigated. The experiments were carried out for different filling ratios of 30 to 90% with input heat transfer rates of 0 to 1000 W and for various working fluids such as distilled water, ethanol, methanol and acetone. Investigations were focused to find the influence of the filling ratio, maximum heat transport capability for various working fluids in a vertical two phase closed thermosyphon. The maximum heat transport capability was found to be high for water compared to other fluids such as ethanol, methanol and acetone, at the operating temperatures higher than 40°C. © 2010 Asian Network for Scientific Information.
引用
收藏
页码：413 / 418
页数：5
相关论文
共 50 条
  • [21] Heat transfer analysis of an inclined two-phase closed thermosyphon
    Zuo, ZJ
    Gunnerson, FS
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1995, 117 (04): : 1073 - 1075
  • [22] CONDENSING HEAT TRANSFER IN AN ADVANCED TWO-PHASE CLOSED THERMOSYPHON
    李修伦
    闻建平
    单岩昆
    黄鸿鼎
    Chinese Journal of Chemical Engineering, 1996, (01) : 88 - 92
  • [23] INFLUENCE OF VAPOR BUBBLES ON THE THERMAL PERFORMANCE OF A TWO-PHASE CLOSED THERMOSYPHON LOOP WITH A LIQUID HEAT TRANSFER AGENT
    Wei, Lingjiao
    Yuan, Dazhong
    Guo, Chaohong
    Tang, Dawei
    HEAT TRANSFER RESEARCH, 2016, 47 (12) : 1109 - 1120
  • [24] Heat transfer performance of an anodized two-phase closed thermosyphon with refrigerant as working fluid
    Solomon, A. Brusly
    Roshan, R.
    Vincent, Walter
    Karthikeyan, V. K.
    Asirvatharn, L. Godson
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 82 : 521 - 529
  • [25] Performance of a two-phase closed thermosyphon solar collector with a shell and tube heat exchanger
    Nada, SA
    El-Ghetany, HH
    Hussein, HMS
    APPLIED THERMAL ENGINEERING, 2004, 24 (13) : 1959 - 1968
  • [26] Heat transfer performance of two-phase closed thermosyphon with oxidized CNT/water nanofluids
    Saeed Zeinali Heris
    Marjan Fallahi
    Mehdi Shanbedi
    Ahmad Amiri
    Heat and Mass Transfer, 2016, 52 : 85 - 93
  • [27] Effects and limitations of superhydrophobic surfaces on the heat transfer performance of a two-phase closed thermosyphon
    Seo, Donghyun
    Park, Jinsoo
    Shim, Jaehwan
    Nam, Jeonghyeon
    Shin, Dong Hwan
    Nam, Youngsuk
    Lee, Jungho
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 176
  • [28] Heat transfer performance of two-phase closed thermosyphon with oxidized CNT/water nanofluids
    Heris, Saeed Zeinali
    Fallahi, Marjan
    Shanbedi, Mehdi
    Amiri, Ahmad
    HEAT AND MASS TRANSFER, 2016, 52 (01) : 85 - 93
  • [29] Upgrading of the thermal performance of two-phase closed thermosyphon (TPCT) using fusel oil
    Adnan Sözen
    Tayfun Menlik
    Metin Gürü
    Mustafa Aktaş
    Heat and Mass Transfer, 2017, 53 : 141 - 149
  • [30] A comparative investigation on the effect of different nanofluids on the thermal performance of two-phase closed thermosyphon
    Xu, Qian
    Liu, Lin
    Feng, Junxiao
    Qiao, Lihong
    Yu, Chuqiao
    Shi, Wenjun
    Ding, Chong
    Zang, Yong
    Chang, Chun
    Xiong, Yaxuan
    Ding, Yulong
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 149
12345