Ionic conductivity and hydrogen crossover for IT-PEMFCs: Influence of pressure, temperature, relative humidity and reinforcement

Improved knowledge on Proton Exchange Membrane Fuel Cell (PEMFC) behaviour in the Intermediate Temperature (IT: 80–120 °C) is needed. Here, ionic conductivity and H2 permeability are analysed under H2/N2 using electrochemical impedance spectroscopy, linear sweep voltammetry for three catalyst-coated membranes (CCMs): Nafion HP (reinforced), Nafion 211 (non-reinforced) and a reinforced commercial membrane (RCM, membrane thickness 13 μm). Multiple relative humidity (RH) levels and pressure configurations are analysed at IT. Results show that ionic conductivity and H2 permeability increase with temperature and RH. However, lower crossover is measured above 100 °C and wet conditions due to low H2 partial pressure. The highest crossover is measured with an overpressure on the H2 side which, especially for RCM, suggests possible convection. The membrane reinforcement might reduce the permeability and it decreases the conductivity. Mass spectrometry confirmed that sprayed CCMs suffer from higher crossover than pristine membranes, although the membrane thickness is unchanged. © 2024 The Authors