Development of a high-performance wind turbine equipped with a brimmed diffuser shroud

被引：0

作者：

Ohya, Yuji ^{[1
]}

Karasudani, Takashi ^{[1
]}

Sakurai, Akira ^{[2
]}

Inoue, Masahiro ^{[3
]}

机构：

[1] Research Institute for Applied Mechanics, Kyushu University, Kasuga, Japan

[2] Department of Aeronautics and Astronautics, Kyushu University, Fukuoka, Japan

[3] Sasebo National College of Technology, Sasebo, Japan

来源：

Transactions of the Japan Society for Aeronautical and Space Sciences | 2006年 / 49卷 / 163期

关键词：

We have developed a new wind turbine system that consists of a diffuser shroud with a broad-ring brim at the exit periphery and a wind turbine inside it. The brimmed-diffuser shroud plays the role of a device for collecting and accelerating the approaching wind. Emphasis is placed on positioning the brim at the exit of the diffuser shroud. Namely; the brim generates a very low-pressure region in the exit neighborhood of the diffuser by strong vortex formation and draws more mass flow to the wind turbine inside the diffuser shroud. To obtain a higher power output of the shrouded wind turbine; we have examined the optimal form for the brimmed diffuser; such as the diffuser open angle; brim height; hub ratio; centerbody length; inlet shroud shape and so on. As a result; a shrouded wind turbine equipped with a brimmed diffuser has been developed; and demonstrated power augmentation for a given turbine diameter and wind speed by a factor of about five compared to a standard (bare) wind turbine. © 2006 The Japan Society for Aeronautical and Space Sciences;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：18 / 24

共 50 条

[31] Research and development of high-performance airfoil sections for vertical axis wind turbine at low-Reynolds number
Seki, Kazuichi
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 1991, 57 (536): : 1297 - 1304
[32] Computational fluid dynamic analysis of roof-mounted vertical-axis wind turbine with diffuser shroud, flange, and vanes
Abu-Thuraia, H.
Aygun, C.
Paraschivoiu, M.
Allard, M. A.
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2018, 42 (04) : 404 - 415
[33] High-Performance Synthetic Rope Allows Craneless Wind Turbine Blade Replacement
Swiezynski, Jim
POWER, 2015, 159 (10) : 16 - 20
[34] Design and Research of High-Performance Low-Speed Wind Turbine Blades
Zhang, Jialin
Zhou, Zhenggui
Lei, Yansheng
2009 WORLD NON-GRID-CONNECTED WIND POWER AND ENERGY CONFERENCE, 2009, : 161 - 165
[35] DEVELOPMENT AND FIELD TESTING OF AN INCLINED FLANGED COMPACT DIFFUSER FOR A MICRO WIND TURBINE
Kale, Sandip
Sapali, S. N.
ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 6B, 2015,
[36] PERFORMANCE INVESTIGATION OF A SMALL HORIZONTAL AXIS WIND TURBINE EQUIPPED WITH FLEXIBLE BLADES
MacPhee, David W.
Beyene, Asfaw
PROCEEDINGS OF THE ASME POWER CONFERENCE, 2015, 2016,
[37] Effect of Rotor Blades Number and Rotor Position on the Performance of a Diffuser Augmented Wind Turbine
Shkhair, Mohammed Mohsin
Jaber, Oday Kadhim
Al Absi, Salih Meri
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, 2022, 11 (11): : 858 - 864
[38] Determining Diffuser Augmented Wind Turbine performance using a combined CFD/BEM method
Kesby, J. E.
Bradney, D. R.
Clausen, P. D.
SCIENCE OF MAKING TORQUE FROM WIND (TORQUE 2016), 2016, 753
[39] Development of a High-Performance Indirectly Hydrogen-Cooled Turbine Generator
Ohki, Y.
IEEE ELECTRICAL INSULATION MAGAZINE, 2018, 34 (01) : 61 - 63
[40] Single-Objective Optimal Design of a High-Performance Wind Turbine Airfoil Family
Zhang, Zhaohuang
Gao, Di
Qi, Yunfei
Cheng, Kefeng
IEEE ACCESS, 2023, 11 : 128261 - 128287

← 1 2 3 4 5 →