Stiffness analysis and stiffness mapping of 3-RRR planar parallel mechanism based on CCT stiffness matrix

被引：0
|
作者：
School of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China [1 ]
不详 [2 ]
机构：
来源：
Dongbei Daxue Xuebao | 2007年 / 1卷 / 91-94期
关键词：
Joints (structural components) - Mapping - Mechanisms - Stiffness - Stiffness matrix;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The analytical stiffness equations of the part concerning joint stiffness and configuration and the uncompleted analytical stiffness equations of the part affected by external forces of 3-RRR planar parallel mechanism were all deduced, based on the conservative congruence transformation (CCT) stiffness matrix. The method of stiffness mappings was given, and the maps of the mechanism were presented to illustrate the properties of the stiffness of the mechanism. The stiffness characteristics of the mechanism were analyzed and discussed. It was revealed that the stiffness of the mechanism is configuration dependent and proportional to the actuating forces and joint stiffness. The stiffness becomes higher towards the boundaries of working space and vise versa, which forms a stronger stiffness 'ring' area near the boundaries, and a weaker stiffness 'zone' near the center of working space.
引用
收藏
相关论文
共 50 条
  • [41] A Parallel Factorization Algorithm for Stiffness Matrix Based on Threadpool
    Chen, Juntao
    Xiao, Ming
    Zhang, Yuting
    INFORMATION TECHNOLOGY IN GEO-ENGINEERING, 2010, : 445 - 451
  • [42] Stiffness Matrix of Compliant Parallel Mechanisms
    Quennouelle, C.
    Gosselin, C. M.
    ADVANCES IN ROBOT KINEMATICS: ANALYSIS AND DESIGN, 2008, : 331 - 341
  • [43] Interference analysis and workspace optimization of 3-RRR spherical parallel mechanism
    Tao, Zongjie
    An, Qi
    MECHANISM AND MACHINE THEORY, 2013, 69 : 62 - 72
  • [44] A planar parallel 3-RRR robot with synchronously driven cranks
    Can, Engin
    Stachel, Hellmuth
    MECHANISM AND MACHINE THEORY, 2014, 79 : 29 - 45
  • [45] STIFFNESS MATRIX OF COMPLIANT PARALLEL MECHANISMS
    Quennouelle, Cyril
    Gosselin, Clement
    DETC 2008: 32ND ANNUAL MECHANISMS AND ROBOTICS CONFERENCE, VOL. 2, PTS A & B, 2009, : 151 - 161
  • [46] Inertia Match of a 3-RRR Reconfigurable Planar Parallel Manipulator
    Shao Zhufeng
    Tang Xiaoqiang
    Chen Xu
    Wang Liping
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2009, 22 (06) : 791 - 799
  • [47] Crank conditions and rotatability of 3-RRR planar parallel mechanisms
    LI RuiQin 1 &DAI Jian S 2 1 College of Mechanical Engineering and Automation
    2 Department of Mechanical Engineering
    Science in China(Series E:Technological Sciences), 2009, (12) : 3601 - 3612
  • [48] Symbolic Dynamic Balance of the 3-RRR Planar Parallel Manipulator
    Jaime Gallardo-Alvarado
    Journal of The Institution of Engineers (India): Series C, 2025, 106 (1) : 331 - 339
  • [49] Crank conditions and rotatability of 3-RRR planar parallel mechanisms
    Li, RuiQin
    Dai, Jian S
    SCIENCE IN CHINA SERIES E-TECHNOLOGICAL SCIENCES, 2009, 52 (12): : 3601 - 3612
  • [50] Design Analysis of a Variable Stiffness Gripper Based on Flexible Parallel Mechanism
    Li J.
    Yang G.
    Zhang L.
    Zhang C.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2019, 55 (21): : 64 - 72
12345