3D geometric constraint solving using the method of kinematic analysis

被引：0
|
作者：
Xia, Hongjian [1 ]
Wang, Boxing [1 ]
Chen, Liping [1 ]
Huang, Zhengdong [1 ]
机构：
[1] CAD Center, School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, China
来源：
International Journal of Advanced Manufacturing Technology | 2008年 / 35卷 / 7-8期
关键词：
In this paper; an approach based on kinematic method for solving 3D geometric assembly constraints is presented. The relative generalized coordinates and generalized recursive formulations used in kinematic analysis are utilized to reduce the size of constraint equations. Based on the cut-constraint method; this approach can be used to solve all kinds of configurations. In the case of an open-loop constraint system; the geometric constraints can be satisfied by sequentially determining the values of relative generalized coordinates. With respect to a closed-loop constraint system; the proposed approach converts it to a spanning tree structure by cutting constraints and introducing cut-constraint equations. Furthermore; a topological analysis method is also developed to obtain the spanning tree with the minimal number of cut-constraint equations; and the analytical Jacobian matrix of cut-constraint equations is derived to enhance computational efficiency. In the end; the proposed approach is demonstrated and validated using two examples of closed-loop geometric constraint system. © 2006 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：711 / 722
相关论文
共 50 条
  • [21] A Comprehensive Evaluation of the DFP Method for Geometric Constraint Solving Algorithm Using PlaneGCS
    Sun, Yunlei
    Li, Yucong
    Liu, Kangping
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2023, 30 (06): : 2026 - 2035
  • [22] Kinematic feasibility analysis of 3D grasps
    Guan, YS
    Zhang, H
    2001 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS I-IV, PROCEEDINGS, 2001, : 2197 - 2202
  • [23] Kinematic Analysis of 3D Printing Mechanisms
    Talpasanu, Ilie
    Chomyszak, Stephen
    INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2015, VOL 5C, 2016,
  • [24] Maneuvering Target Tracking With 3D Variable Turn Model and Kinematic Constraint
    Kim, Lamsu
    Lee, Dongwoo
    Bang, Hyochoong
    JOURNAL OF THE KOREAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, 2020, 48 (11) : 881 - 888
  • [25] 3D Shape Analysis for Point Clouds Using Variational Geometric
    Jin, Longcun
    2015 11TH INTERNATIONAL CONFERENCE ON NATURAL COMPUTATION (ICNC), 2015, : 915 - 918
  • [26] 3D Facial Skin Texture Analysis Using Geometric Descriptors
    Seck, Alassane
    Dee, Hannah
    Tiddeman, Bernard
    2014 22ND INTERNATIONAL CONFERENCE ON PATTERN RECOGNITION (ICPR), 2014, : 1126 - 1131
  • [27] Analysis of Hyoid–Larynx Complex Using 3D Geometric Morphometrics
    Anthony Loth
    Julien Corny
    Laure Santini
    Laurie Dahan
    Patrick Dessi
    Pascal Adalian
    Nicolas Fakhry
    Dysphagia, 2015, 30 : 357 - 364
  • [28] Analysis of the capabilities of marine electrical exploration technologies in solving problems of prospecting and monitoring oil and gas fields using 3D modeling and geometric 3D inversion
    Persova, M. G.
    Soloveichik, Yu. G.
    Sivenkova, A. P.
    Vagin, D. V.
    Kiselev, D. S.
    VESTNIK OF SAINT PETERSBURG UNIVERSITY EARTH SCIENCES, 2024, 69 (02):
  • [29] Solving 3D geometric constraints for closed-loop assemblies
    Kim, JS
    Kim, KS
    Lee, JY
    Jung, HB
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2004, 23 (9-10): : 755 - 761
  • [30] Solving 3D geometric constraints for closed-loop assemblies
    J. S. Kim
    K. S. Kim
    J. Y. Lee
    H. B. Jung
    The International Journal of Advanced Manufacturing Technology, 2004, 23 : 755 - 761
12345