3D geometric constraint solving using the method of kinematic analysis

被引：0
|
作者：
Xia, Hongjian [1 ]
Wang, Boxing [1 ]
Chen, Liping [1 ]
Huang, Zhengdong [1 ]
机构：
[1] CAD Center, School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei 430074, China
来源：
International Journal of Advanced Manufacturing Technology | 2008年 / 35卷 / 7-8期
关键词：
In this paper; an approach based on kinematic method for solving 3D geometric assembly constraints is presented. The relative generalized coordinates and generalized recursive formulations used in kinematic analysis are utilized to reduce the size of constraint equations. Based on the cut-constraint method; this approach can be used to solve all kinds of configurations. In the case of an open-loop constraint system; the geometric constraints can be satisfied by sequentially determining the values of relative generalized coordinates. With respect to a closed-loop constraint system; the proposed approach converts it to a spanning tree structure by cutting constraints and introducing cut-constraint equations. Furthermore; a topological analysis method is also developed to obtain the spanning tree with the minimal number of cut-constraint equations; and the analytical Jacobian matrix of cut-constraint equations is derived to enhance computational efficiency. In the end; the proposed approach is demonstrated and validated using two examples of closed-loop geometric constraint system. © 2006 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：711 / 722
相关论文
共 50 条
  • [1] 3D geometric constraint solving using the method of kinematic analysis
    Xia, Hongjian
    Wang, Boxing
    Chen, Liping
    Huang, Zhengdong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 35 (7-8): : 711 - 722
  • [2] 3D geometric constraint solving using the method of kinematic analysis
    Hongjian Xia
    Boxing Wang
    Liping Chen
    Zhengdong Huang
    The International Journal of Advanced Manufacturing Technology, 2008, 35 : 711 - 722
  • [3] 3D geometric constraint solving with conicoid
    Jiang, K
    Gao, XS
    CAD/GRAPHICS '2001: PROCEEDINGS OF THE SEVENTH INTERNATIONAL CONFERENCE ON COMPUTER AIDED DESIGN AND COMPUTER GRAPHICS, VOLS 1 AND 2, 2001, : 25 - 32
  • [4] 3D geometric constraint solving with conicoid
    Jiang, Kun
    Gao, Xiao-Shan
    Ruan Jian Xue Bao/Journal of Software, 2002, 13 (04): : 482 - 489
  • [5] Dynamically solving 3D geometric constraint satisfaction problems
    Wu, YM
    Yin, WS
    Zhang, XF
    Zhou, J
    FIFTH INTERNATIONAL CONFERENCE ON COMPUTER-AIDED DESIGN & COMPUTER GRAPHICS, VOLS 1 AND 2, 1997, : 399 - 402
  • [6] A projection transformation method for solving 3D assembly geometric constraint closed-loops
    Huang, Xueliang
    Chen, Liping
    Wang, Boxing
    Jisuanji Fuzhu Sheji Yu Tuxingxue Xuebao/Journal of Computer-Aided Design and Computer Graphics, 2010, 22 (12): : 2138 - 2146
  • [7] New Geometric Constraint Solving Formulation: Application to the 3D Pentahedron
    Barki, Hichem
    Cane, Jean-Marc
    Michelucci, Dominique
    Foufou, Sebti
    IMAGE AND SIGNAL PROCESSING, ICISP 2014, 2014, 8509 : 594 - 601
  • [8] Kinematic chain substitution for geometric constraint solving
    Ogan, G
    Metzger, FJ
    Seybold, BJ
    Engeli, M
    WSCG 98, VOL 2: SIXTH INTERNATIONAL CONFERENCE IN CENTRAL EUROPE ON COMPUTER GRAPHICS AND VISUALIZATION 98, 1998, : 283 - 290
  • [9] A constructive approach to solving 3-D geometric constraint systems using dependence analysis
    Li, YT
    Hu, SM
    Sun, JG
    COMPUTER-AIDED DESIGN, 2002, 34 (02) : 97 - 108
  • [10] A C-tree decomposition algorithm for 2D and 3D geometric constraint solving
    Gao, XS
    Lin, Q
    Zhang, GF
    COMPUTER-AIDED DESIGN, 2006, 38 (01) : 1 - 13
12345