Influence of high temperature and pressure ammonia solution treatment on interfacial behavior of carbon fiber/epoxy resin composites

被引:0
|
作者
Meng, L.H. [1 ]
Chen, Z.W. [1 ]
Song, X.L. [1 ]
Liang, Y.X. [1 ]
Huang, Y.D. [1 ]
Jiang, Z.X. [1 ]
机构
[1] Department of Polymer Materials and Engineering, School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001, China
来源
Journal of Applied Polymer Science | 2009年 / 113卷 / 06期
关键词
The method of high temperature and pressure ammonia solution treatment to improve the interfacial performances of carbon fiber/epoxy composites is discussed in this study. Besides; the influence of high temperature and pressure ammonia solution treatment on carbon fiber and its reinforced epoxy composite interface performance were studied. The untreated and treated carbon fibers were characterized by monofilament tensile test; X-ray photoelectron spectroscopy (XPS); and atomic force microscope (AFM). The interfacial adhesion of the untreated and treated carbon fibers reinforced epoxy resin composites were also evaluated by interface shear strength (IFSS) test; interlaminar shear strength (ILSS) test; and fracture morphology analysis. It was found that the interfacial adhesion of composites increased greatly after high temperature and pressure ammonia solution treatment. The improvement of interfacial adhesion was attributed to the increase of polar functional groups and surface roughness of carbon fibers surface after treatment. © 2009 Wiley Periodicals; Inc;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
页码:3436 / 3441
相关论文
共 50 条
  • [1] Influence of High Temperature and Pressure Ammonia Solution Treatment on Interfacial Behavior of Carbon Fiber/Epoxy Resin Composites
    Meng, L. H.
    Chen, Z. W.
    Song, X. L.
    Liang, Y. X.
    Huang, Y. D.
    Jiang, Z. X.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 113 (06) : 3436 - 3441
  • [2] Influence of ultrasonic treatment on the characteristics of epoxy resin and the interfacial property of its carbon fiber composites
    Huang, YD
    Liu, L
    Qiu, JH
    Shao, L
    COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (16) : 2153 - 2159
  • [3] Influence of phenolic resin surface treatment agent on interfacial adhesion of carbon fiber reinforced epoxy resin composites
    Wang, Chao
    Niu, Yong'an
    Wang, Jing
    Su, Tao
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2008, 25 (01): : 59 - 63
  • [4] Influence of rare earth treatment on interfacial properties of carbon fiber/epoxy composites
    Xu, Zhiwei
    Huang, Yudong
    Zhang, Chunhua
    Chen, Gang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 444 (1-2): : 170 - 177
  • [5] Influence of carbon nanotube on interfacial and mechanical behavior of carbon fiber reinforced epoxy laminated composites
    Jain, Vaibhav
    Jaiswal, Satish
    Dasgupta, Kinshuk
    Lahiri, Debrupa
    POLYMER COMPOSITES, 2022, 43 (09) : 6344 - 6354
  • [6] Thermal Aging Behavior of Carbon Fiber/Epoxy Composites at High Temperature
    Wang, Rongguo
    Jiang, Long
    Xu, Zhonghai
    Yang, Fan
    Hao, Lifeng
    Jiao, Weicheng
    Liu, Wenbo
    POLYMERS & POLYMER COMPOSITES, 2014, 22 (03): : 309 - 312
  • [7] A STUDY OF THE INFLUENCE OF THE ENVIRONMENT ON THE MEASUREMENT OF INTERFACIAL PROPERTIES OF CARBON-FIBER EPOXY-RESIN COMPOSITES
    BUXTON, A
    BAILLIE, C
    COMPOSITES, 1994, 25 (07): : 604 - 608
  • [8] Influence of phenolic resin surface treatment agent on interfacial adhesion of carbon fibre reinforced epoxy resin composites
    Wang, Chao
    Wang, Jing
    Niu, Yongan
    ADVANCED COMPOSITES LETTERS, 2007, 16 (06) : 237 - 241
  • [9] Influence of interfacial reaction on interfacial performance of carbon fiber and polyarylacetylene resin composites
    Jiang, Z. X.
    Huang, Y. D.
    Liu, L.
    Lu, C.
    COMPOSITE INTERFACES, 2008, 15 (04) : 441 - 451
  • [10] Effect of ozone treatment on the interfacial properties of high modulus carbon fiber/epoxy composites
    Zhao, Xiaojin
    Qin, Wei
    Wang, Benli
    2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM, 2007, 546-549 : 1547 - +