Effect of posttreatment on morphology and properties of poly(ethylene-co-vinyl alcohol) microporous hollow fiber via thermally induced phase separation

被引：0
|
作者：
Lv, Rui [1 ]
Zhou, Jing [1 ]
Du, Qiangguo [1 ]
Wang, Haitao [1 ]
Zhong, Wei [1 ]
机构：
[1] Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai 200433, China
来源：
Journal of Applied Polymer Science | 2007年 / 104卷 / 06期
关键词：
Poly(ethylene-co-vinyl alcohol) (EVOH) hollow fiber membranes were prepared by thermally induced phase separation (TIPS) process. Water; methanol; and acetone were used to extract the diluents in the fibers; respectively. Bigger shrinkage of fibers during extractant evaporation was observed when water or methanol was used. Their interaction parameters with EVOH were calculated via Hansen solubility; respectively. The mechanism of hollow fiber volume shrinkage was discussed. It was found that affinity of the extractant with polymer was the critical factor except for the surface tension of extractant. Through the X-ray diffraction analysis during extraction and evaporation; the crystallization behavior of the polymer was studied. From the SEM photos; it was observed that the volume shrinkage was derived from the collapse of porous structure. The fiber sample extracted by acetone had similar morphology with the sample freeze-dried. The gas and water permeability were also measured and the results were coincident with the morphology of fibers and shrinkage data. © 2007 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：4106 / 4112
相关论文
共 50 条
  • [21] Antifungal effect of carbendazim supported on poly(ethylene-co-vinyl alcohol)
    Lee, Hyoung-Joo
    Park, Eun Soo
    Park, Hye Young
    Kim, Mal-Nam
    Chung, Kyoo-Hyun
    Yoon, Jin-San
    American Chemical Society, Polymer Preprints, Division of Polymer Chemistry, 2000, 41 (01): : 260 - 261
  • [22] Effect of crystallization and liquid-liquid phase separation on phase-separation kinetics in poly (ethylene-co-vinyl alcohol)/glycerol solution
    Shang, MX
    Matsuyama, H
    Maki, T
    Teramoto, M
    Lloyd, DR
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2003, 41 (02) : 194 - 201
  • [23] Morphology and Isothermal Crystallization Kinetics of Polypropylene/Poly(ethylene-co-vinyl alcohol) Blends
    Luo, D-J
    Shao, H-J
    Wei, F-J
    Zhang, K-Z
    Cui, Z-Y
    Yu, J.
    Qin, S-H
    INTERNATIONAL POLYMER PROCESSING, 2019, 34 (02) : 195 - 208
  • [24] Synthesis and properties of polymeric biocides based on poly(ethylene-co-vinyl alcohol)
    Park, ES
    Kim, HK
    Shim, JH
    Kim, MN
    Yoon, JS
    JOURNAL OF APPLIED POLYMER SCIENCE, 2004, 93 (02) : 765 - 770
  • [25] Structure and properties of starch/poly(ethylene-co-vinyl alcohol) blown films
    Stenhouse, PJ
    Ratto, JA
    Schneider, NS
    JOURNAL OF APPLIED POLYMER SCIENCE, 1997, 64 (13) : 2613 - 2622
  • [26] THE INFLUENCE OF MOISTURE ON THE DIELECTRIC-PROPERTIES OF POLY(ETHYLENE-CO-VINYL ALCOHOL)
    BIZET, A
    NAKAMURA, N
    TERAMOTO, Y
    HATAKEYAMA, T
    THERMOCHIMICA ACTA, 1994, 241 : 191 - 198
  • [27] Structure and properties of starch/poly(ethylene-co-vinyl alcohol) blown films
    U.S. Army Natick Research, Natick, United States
    J Appl Polym Sci, 13 (2613-2622):
  • [28] Impact of the ethylene content on poly (ethylene-co-vinyl alcohol) membrane morphology and performance via immersion precipitation for lithium extraction
    Huang, Tao
    Song, Jianfeng
    Xing, Lixin
    Li, Xuemei
    He, Tao
    JOURNAL OF MEMBRANE SCIENCE, 2019, 579 : 172 - 179
  • [29] The effect of alumina particulate morphology on the properties of reinforced poly(propylene) and poly(ethylene-co-vinyl acetate) composites
    Prachar, MJ
    Hay, J
    Ponton, C
    ANGEWANDTE MAKROMOLEKULARE CHEMIE, 1996, 242 : 37 - 45
  • [30] Effect of quenching temperature on the morphology and separation properties of polypropylene microporous tubular membranes via thermally induced phase separation
    Yang, MC
    Perng, JS
    JOURNAL OF POLYMER RESEARCH-TAIWAN, 1998, 5 (04): : 213 - 219
12345