A study of vacuum diffusion bonding and interface structure of Ti/Al dissimilar materials

被引：0
|
作者：
Li, Ya-Jiang [1 ,2 ]
Gerasimov, S.A. [2 ]
Wang, Juan [1 ]
Ma, Hai-Jun [1 ]
Ren, Jiang-Wei [1 ]
机构：
[1] Key Lab. of Liquid Structure and Heredity of Materials, Shandong University, Jinan 250061, China
[2] Materials Science and Engineering Department, Bauman Moscow State Technical University, Moscow 105005, Russia
来源：
Cailiao Kexue yu Gongyi/Material Science and Technology | 2007年 / 15卷 / 02期
关键词：
Aluminum - Dissimilar materials - Interfaces (materials) - Intermetallics - Microhardness - Microstructure - Scanning electron microscopy - Titanium sheet - Vacuum - X ray diffraction analysis;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Ti/Al dissimilar materials were successfully bonded together by means of vacuum diffusion bonding after aluminizing on the surface of Ti sheet. The microstructure and phase constituent for the Ti/Al diffusion bonded joint were analyzed by means of scanning electron microscopy (SEM), microsclerometer and X-ray diffractometry (XRD). The test results indicated that Ti/Al diffusion joint included Ti side interface, diffusion transition zone and Al side interface. Intermetallics Ti3Al, TiAl and TiAl3 were formed in the transition zone near Ti/Al interface. Controlling technology parameters of diffusion bonding could reduce the thickness of intermetallics layer. The microhardness of the Al substrate away from the diffusion interface was 30-40HM. There was no obvious brittle phase near the Ti/Al interface of Ti substrate and transition zone.
引用
收藏
页码：206 / 210
相关论文
共 50 条
  • [21] Shear strength and fracture characteristics near the interface of diffusion bonding of Fe3Al/Q235 dissimilar materials
    Li, Y. J.
    Wang, J.
    Ma, H. J.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2012, 50 (02): : 83 - 88
  • [22] STRUCTURE AND MECHANISM OF BONDING AT A DIFFUSION-BONDED AL/SIC INTERFACE
    RATNAPARKHI, PL
    HOWE, JM
    ACTA METALLURGICA ET MATERIALIA, 1994, 42 (03): : 811 - 823
  • [23] Reduction of the stresses introduced during the diffusion bonding of dissimilar materials
    Raevska, S
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 77 (1-3) : 50 - 53
  • [24] Structure and properties of interface between dissimilar materials
    Echigoya, J
    Yamaguchi, A
    ISIJ INTERNATIONAL, 1997, 37 (12) : 1251 - 1257
  • [25] Analytical approaches to describe diffusion bonding of similar and dissimilar materials
    Zhu, Fuhui
    Li, Xifeng
    Peng, Heli
    Zhao, Hongkai
    Xiong, Liangtong
    Chen, Jun
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2020, 25 (08) : 661 - 668
  • [26] BRAZING AND DIFFUSION BONDING OF TITANIUM ALLOYS TO SIMILAR AND DISSIMILAR MATERIALS
    BERTOSSA, RC
    HIKIDO, T
    SAE TRANSACTIONS, 1966, 74 : 151 - &
  • [27] An investigation of Ti-43Al-9V/Ti-6Al-4V interface by diffusion bonding
    Wang, X. R.
    Yang, Y. Q.
    Luo, X.
    Zhang, W.
    Zhao, G. M.
    Huang, B.
    INTERMETALLICS, 2013, 36 : 127 - 132
  • [28] Formation process of the bonding joint in Ti/Al diffusion bonding
    Yao Wei
    Wu Aiping
    Zou Guisheng
    Ren Halie
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 480 (1-2): : 456 - 463
  • [29] Interface compounds formed during the diffusion bonding of Al2O3 to Ti
    A. M. Kliauga
    M. Ferrante
    Journal of Materials Science, 2000, 35 : 4243 - 4249
  • [30] Interface compounds formed during the diffusion bonding of Al2O3 to Ti
    Kliauga, AM
    Ferrante, M
    JOURNAL OF MATERIALS SCIENCE, 2000, 35 (17) : 4243 - 4249
12345