Fire resistance of repaired components by polymer-modified cement mortar

被引：0

作者：

Hamasaki H. ^{[1
]}

Motegi T. ^{[2
]}

Noguchi T. ^{[3
]}

Wang D. ^{[4
]}

Kim H. ^{[3
]}

机构：

[1] Dept. of Building Materials and Components, Building Research Institute

[2] Dept. of Fire Safety, Building Research Institute

[3] Dept.of Arch., GraduateSchool of Eng., Univ.of Tokyo

[4] Iron and Steel Products Business Unit, Mitsui and Co., Ltd

来源：

Journal of Structural and Construction Engineering | 2010年 / 75卷 / 652期

关键词：

Adhesive Strength; Fire Test; Monolithic Property; Polymer Modified Cement Mortar; Section Repair; Temperature Distribution;

D O I：

10.3130/aijs.75.1065

中图分类号：

学科分类号：

摘要：

This paper deals with the fire resistance of repaired components by polymer-modified cement mortar. The experiment examine fire test for two hours, confirmed the damage conditions and the temperature distribution of repair sections, and adhesive strength. As the result, the monolithic property of repair section depends on its size and thickness, the case of large and thin is relatively danger. The temperature distribution in the repair section is relatively low compared with an ordinary concrete and mortar, so harmful influence to the structural safety in fire is low from the viewpoint of the temperature of the reinforcing bar.

引用

页码：1065 / 1071

页数：6

共 50 条

[11] Rheological, mechanical, and abrasion characteristics of polymer-modified cement mortar and concrete
Zhou, Changjun
Chen, Liangliang
Zheng, Shaopeng
Xu, Yunxi
Feng, Decheng
CANADIAN JOURNAL OF CIVIL ENGINEERING, 2020, 47 (11) : 1226 - 1237
[12] Properties of polymer-modified cement mortar using pre-enveloping method
Wu, KR
Zhang, D
Song, JM
CEMENT AND CONCRETE RESEARCH, 2002, 32 (03) : 425 - 429
[13] Mechanical Property Performance of Polymer-Modified Calcium Sulfoaluminate Cement Mortar Systems
Brien, Joshua V.
Mahboub, Kamyar C.
Robl, Thomas L.
ADVANCES IN CIVIL ENGINEERING MATERIALS, 2013, 2 (01): : 307 - 315
[14] Physicomechanical properties of irradiated SBR latex polymer-modified cement mortar composites
Yassene, Ali A. M.
Ismail, Mohammed R.
Afify, Mahmoud S.
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2020, 26 (02): : 144 - 154
[15] Interface resistance between polymer cement mortar and concrete substrate of repaired concretes
Dept. of Civil Eng., Gunma Univ., Tenjin-cho, Kiryu, 376-8515
不详
Zairyo, 2007, 8 (742-747): : 742 - 747
[16] An experimental study of some mechanical properties and absorption for polymer-modified cement mortar modified with superplasticizer
Humadi, Hanaa Sh
Ali, Zainab S.
Jabal, Qusay A.
Jawad, Alaa H.
OPEN ENGINEERING, 2024, 14 (01):
[17] Polymer-Modified Cement Composites with Increased Resistance to Elevated Temperatures
Bydzovsky, Jiri
Dufka, Amos
Melichar, Tomas
PROCEEDINGS OF THE CONFERENCE ON THE REHABILITATION AND RECONSTRUCTION OF BUILDINGS CRRB 2012, 2013, 688 : 158 - +
[18] Preparation and Properties of a New Polymer-modified Cement Mortar Containing Iron Tailings Sand
Xiao, Liguang
Liu, Gang
Feng, Shuo
Zhang, Shiting
PROGRESS IN POLYMERS IN CONCRETE, 2013, 687 : 107 - 111
[19] Prevention of air void formation in polymer-modified cement mortar by pre-wetting
Kim, JH
Robertson, RE
CEMENT AND CONCRETE RESEARCH, 1997, 27 (02) : 171 - 176
[20] Microstructural aspects in a polymer-modified cement
Ollitrault-Fichet, R
Gauthier, C
Clamen, G
Boch, P
CEMENT AND CONCRETE RESEARCH, 1998, 28 (12) : 1687 - 1693

← 1 2 3 4 5 →