Combustion enhancement and agglomeration inhibition of HTPB/AP/Al propellants using Al@AP combined with a hydrazo-triazine derivative

被引:0
|
作者
Xu, Ruixuan [1 ]
Li, Xin [1 ]
Xue, Zhihua [1 ]
Yang, Danfeng [1 ]
Chen, Suhang [2 ]
Xu, Kangzhen [2 ]
Yan, Qi-Long [1 ]
Nie, Hongqi [1 ]
机构
[1] Northwestern Polytech Univ, Natl Key Lab Solid Rocket Prop, Xian 710072, Peoples R China
[2] Northwest Univ, Sch Chem Engn, Xian 710069, Peoples R China
关键词
Aluminized solid propellant; Combustion performance; Burning rate modifier; Al-based composites; Nitrogen-rich compound; AMMONIUM-PERCHLORATE; ALUMINUM AGGLOMERATION; THERMAL-DECOMPOSITION; COMPOSITE PROPELLANT; RATE MODIFIER; IGNITION; MODEL;
D O I
10.1016/j.combustflame.2024.113929
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this work, the combustion enhancement and agglomeration inhibition of HTPB-based composite propellants have been achieved by incorporation of Al@AP composites containing a nitrogen-rich compound 4,4 ',6,6 '-tetra(hydrazino)hydrazo-1,3,5-triazine (THHT) as a burning rate modifier. The thermal reactivity and decomposition behavior of Al@AP/THHT composites were studied using DSC/TGA/FT-IR techniques. These composites showed a greater heat release with lower decomposition peak temperature. The propellant formulations could be well tuned by adjusting the mutual distance between Al/AP and THHT crystals. The results suggest that the inclusion of Al@AP/THHT in solid propellants would lead to enhanced energy release, with the value of explosion heat increased from 5632.0 J g(-1) to 5971 J g(-1) (+6.0 %), the ignition delay time decreased from 105 ms to 79 ms (-24.8 %) and the flame radiation intensity maximum raised from 2199 to 1988 (+10.6 %). The modified propellants are featured with a chemical reaction-dependent flame propagation rate at lower pressure range (1 similar to 10 MPa) and a pressure-controlled process over 10 MPa. The burning rate of propellant at 1 MPa can be increased from 6.1 mm s(-1) to 7.0 mm s(-1) (+14.8 %) by the inclusion of Al@AP/THHT. The pressure exponent of modified propellants was reduced from 0.48 to 0.33 in pressure range 1 similar to 15 MPa, which is mainly attributed to the activation of Al@AP at lower pressure. Furthermore, the inhibition of Al agglomeration was found once it was coated with AP. The characterizations on condensed combustion products (CCPs) demonstrated an enhancement in combustion efficiency due to an increased content of Al2O3, accompanied with a remarkable reduction of mean size from 14.0 mu m to 1.3 mu m (-90.7 %) and a rise in the proportion of nano-/micron-sized particles. The overall effects of Al@AP interfacial control and precise catalysis of THHT on the energy release and combustion of propellants were identified and the primitive combustion mechanisms are proposed.
引用
收藏
页数:14
相关论文
共 37 条
  • [21] Development and application of tools to characterize the oxidative degradation of AP/HTPB/Al propellants in a propellant reliability study
    Celina, M
    Minier, L
    Assink, R
    THERMOCHIMICA ACTA, 2002, 384 (1-2) : 343 - 349
  • [22] Fully resolved simulations of micro-unit composite fuel in hydroxyl-terminated polybutadiene (HTPB): Al@AP
    Chang, Xiaoya
    Wen, Mingjie
    Chu, Qingzhao
    Luo, Kai H.
    Chen, Dongping
    CHEMICAL ENGINEERING JOURNAL, 2024, 497
  • [23] Thermal decomposition and combustion behavior of the core-shell Al@AP composite embedded with CuO as a catalyst
    Lyu, Jie-Yao
    Xu, Geng
    Zhang, Haorui
    Yang, Wenming
    Yan, Qi-Long
    FUEL, 2024, 356
  • [24] Insight into the precise catalytic mechanism of CuO on the decomposition and combustion of core-shell Al@AP particles
    Zhou, Xinjian
    Xu, Ruixuan
    Nie, Hongqi
    Yan, Qilong
    Liu, Jun
    Sun, Yunlan
    FUEL, 2023, 346
  • [25] Effects of DC Electric Field on Combustion Characteristics of AP/HTPB/Al Composite Solid Propellant
    Huang, Xing
    Gan, Yun-Hua
    Ao, Wen
    Zhao, Ming-Tao
    Luo, Yan-Lai
    Jiang, Zheng-Wei
    Chen, Ning-Guang
    Tuijin Jishu/Journal of Propulsion Technology, 2023, 44 (01):
  • [26] NEW HTPB/AP/Al PROPELLANT COMBUSTION PROCESS IN THE PRESENCE OF ALUMINUM NANO-PARTICLES
    Trubert, Jean-Francois
    Hommel, Jean
    Lambert, Dominique
    Fabignon, Yves
    Orlandi, Olivier
    INTERNATIONAL JOURNAL OF ENERGETIC MATERIALS AND CHEMICAL PROPULSION, 2008, 7 (02) : 99 - 122
  • [27] Influence of storage time before casting on viscosities and mechanical properties of AP/HTPB/Al solid composite propellants
    Da Cunha, Bruno Cesar Christo
    Mattos, Elizabeth da Costa
    Rocco, Jose Atilio Fritz Fidel
    FIREPHYSCHEM, 2022, 2 (01): : 50 - 55
  • [28] Burning rate and other characteristics of strontium titanate (SrTiO3) supplemented AP/HTPB/Al composite propellants
    Jain, Sunil
    Gupta, Garima
    Kshirsagar, Dhirendra R.
    Khire, Vrushali H.
    Kandasubramanian, Balasubramanian
    DEFENCE TECHNOLOGY, 2019, 15 (03) : 313 - 318
  • [29] Investigation of Mechanical Properties of AP/Al/HTPB-Based Propellants using 2-D Digital Image Correlation at Large and Small Scales
    Jarocki, Christopher M.
    Manship, Timothy D.
    Casey, Alex
    Son, Steven F.
    AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2022, 2022,
  • [30] Burning rate and other characteristics of strontium titanate (SrTiO3) supplemented AP/HTPB/Al composite propellants附视频
    Sunil Jain
    Garima Gupta
    Dhirendra RKshirsagar
    Vrushali HKhire
    Balasubramanian Kandasubramanian
    Defence Technology, 2019, (03) : 313 - 318