Surface heterostructuring of 316L stainless steel manufactured by laser powder bed fusion and hot isostatic pressing

被引：0
|
作者：
Graduate Institute of Ferrous & Energy Materials Technology, Pohang University of Science and Technology , Pohang [1 ]
37673, Korea, Republic of
不详 [2 ]
37673, Korea, Republic of
不详 [3 ]
31460, Korea, Republic of
不详 [4 ]
33720, Finland
不详 [5 ]
51508, Korea, Republic of
不详 [6 ]
31080, Korea, Republic of
不详 [7 ]
37673, Korea, Republic of
不详 [8 ]
980-8577, Japan
不详 [9 ]
03722, Korea, Republic of
机构：
来源：
Mater. Sci. Eng. A |
基金：
新加坡国家研究基金会;
关键词：
Austenitic stainless steel - Deterioration - Hot isostatic pressing - Metal cutting - Powder metals - Sintering;
D O I：
146820
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [31] Development of crystallographic misorientation in laser powder bed fusion 316L stainless steel
    Biswas, Prosenjit
    Ma, Ji
    ADDITIVE MANUFACTURING, 2024, 80
  • [32] Ultrasonic nondestructive evaluation of laser powder bed fusion 316L stainless steel
    Kim, Changgong
    Yin, Houshang
    Shmatok, Andrii
    Prorok, Barton C.
    Lou, Xiaoyuan
    Matlack, Kathryn H.
    ADDITIVE MANUFACTURING, 2021, 38
  • [33] Porosity control in 316L stainless steel using cold and hot isostatic pressing
    Essa, Khamis
    Jamshidi, Parastoo
    Zou, Ji
    Attallah, Moataz M.
    Hassanin, Hany
    MATERIALS & DESIGN, 2018, 138 : 21 - 29
  • [34] Fuzzy process optimization of laser powder bed fusion of 316L stainless steel
    Ponticelli, Gennaro Salvatore
    Venettacci, Simone
    Giannini, Oliviero
    Guarino, Stefano
    Horn, Matthias
    PROGRESS IN ADDITIVE MANUFACTURING, 2023, 8 (03) : 437 - 458
  • [35] Fuzzy process optimization of laser powder bed fusion of 316L stainless steel
    Gennaro Salvatore Ponticelli
    Simone Venettacci
    Oliviero Giannini
    Stefano Guarino
    Matthias Horn
    Progress in Additive Manufacturing, 2023, 8 : 437 - 458
  • [36] Stability of cellular microstructure in laser powder bed fusion of 316L stainless steel
    Bertoli, Umberto Scipioni
    MacDonald, Benjamin E.
    Schoenung, Julie M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 739 : 109 - 117
  • [37] Influence of the surface state on the corrosion behavior of the 316 L stainless steel manufactured by laser powder bed fusion
    Bedmar, J.
    Abu-warda, N.
    Garcia-Rodriguez, S.
    Torres, B.
    Rams, J.
    CORROSION SCIENCE, 2022, 207
  • [38] Effect of Thermal Treatment on Corrosion Behavior of AISI 316L Stainless Steel Manufactured by Laser Powder Bed Fusion
    Andreatta, Francesco
    Lanzutti, Alex
    Revilla, Reynier, I
    Vaglio, Emanuele
    Totis, Giovanni
    Sortino, Marco
    de Graeve, Iris
    Fedrizzi, Lorenzo
    MATERIALS, 2022, 15 (19)
  • [39] Investigation of Material Properties of Wall Structures from Stainless Steel 316L Manufactured by Laser Powder Bed Fusion
    Hoang Minh Vu
    Meiniger, Steffen
    Ringel, Bjoern
    Hoche, Holger Claus
    Oechsner, Matthias
    Weigold, Matthias
    Schmitt, Matthias
    Schlick, Georg
    METALS, 2022, 12 (02)
  • [40] Influence of the surface state on the corrosion behavior of the 316 L stainless steel manufactured by laser powder bed fusion
    Bedmar, J.
    Abu-warda, N.
    García-Rodríguez, S.
    Torres, B.
    Rams, J.
    Corrosion Science, 2022, 207
12345