Morphology and mechanical properties of blends of thermoplastic polyurethane and polyolefins

被引：0
|
作者：
Di, Yali [1 ]
Kang, Maoqing [1 ]
Zhao, Yuhua [1 ]
Yan, Shirun [2 ]
Wang, Xinkui [1 ]
机构：
[1] State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan, China
[2] Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Department of Chemistry, Fudan University, Shanghai, China
来源：
Journal of Applied Polymer Science | 1600年 / 99卷 / 03期
关键词：
Polyolefins (PO) were melt mixed with thermoplastic polyurethane (TPU) in a 20 : 80 weight ratio with or without compatibilizer containing 0.5 wt % of maleic anhydride. Effects of component viscosities on morphology and on mechanical properties of the blend were studied by scanning electron microscope (SEM); tensile property analysis; and dynamic mechanical analysis (DMA). It was found that the disperse particle size of compatibilizer-free blends decreased with the decreasing viscosity ratio of the disperse phase to TPU. The efficiency of the compatibilizer in reducing the particle size varied with viscosity ratios of the disperse phase to compatibilizer. However; the particle size did not decrease with the decreasing viscosity ratio monotoni cally. With lower viscosity ratio; addition of 5 wt % compatibilizer resulted in a greater reduction of particle size and less loss in the tensile properties as compared to the TPU matrix. For the polyethene (PE) that has the lowest viscosity value among all the POs; its size in the blend was stabilized with the addition of compatibilizer and no compatibilization was detected by DMA and by tensile property analysis. The mobility of the disperse phase and compatibilizer and the dispersion competition between them seemed important. © 2005 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：875 / 883
相关论文
共 50 条
  • [41] Polyoxymethylene/thermoplastic polyamide elastomer blends: Morphology, crystallization, mechanical, and antistatic properties
    Fang, Wei
    Fan, Xiaodong
    Li, Ruilong
    Hu, Lin
    Zhou, Tao
    HIGH PERFORMANCE POLYMERS, 2021, 33 (08) : 969 - 977
  • [42] Effect of the type of thermoplastic elastomer and solvent on the morphology and mechanical properties of polycarbonate blends
    Xu, H
    Khan, F
    Sundararajan, PR
    POLYMER ENGINEERING AND SCIENCE, 2006, 46 (01): : 69 - 79
  • [43] Rheological Properties of Polyvinyl Chloride - Thermoplastic Polyurethane Blends
    Dimonie, Doina
    Coserea, Ramona Marina
    Singurel, Gheorghe
    Zaharia, Catalin
    Darie, Raluca Nicoleta
    Pop, Simona Florentina
    MATERIALE PLASTICE, 2009, 46 (03) : 321 - 326
  • [44] Polystyrene and polyether polyurethane elastomer blends compatibilized by SMA: Morphology and mechanical properties
    Cassu, SN
    Felisberti, MI
    JOURNAL OF APPLIED POLYMER SCIENCE, 2002, 83 (04) : 830 - 837
  • [45] Thermoplastic copolyether ester elastomer toughened polycarbonate blends 1. Mechanical properties and morphology of the blends
    Sivaraman, P
    Manoj, NR
    Barman, S
    Chandrasekhar, L
    Mishra, VS
    Kushwaha, R
    Samui, AB
    Chakraborty, BC
    POLYMER TESTING, 2004, 23 (05) : 527 - 532
  • [46] Polystyrene and polyether polyurethane elastomer blends compatibilized by SMA: Morphology and mechanical properties
    Felisberti, M.I. (misabel@iqm.unicamp.br), 1600, John Wiley and Sons Inc. (83):
  • [47] Morphology control of polyoxymethylene/thermoplastic polyurethane blends by adjusting their viscosity ratio
    Cheng, Zhengang
    Wang, Qi
    POLYMER INTERNATIONAL, 2006, 55 (09) : 1075 - 1080
  • [48] Different component ratio of polyamide 1212/thermoplastic polyurethane blends: Effect on phase morphology, mechanical properties, wear resistance, and crystallization behavior
    Xu, Dinghong
    Zhou, Ying
    Guo, Jianbing
    He, Weidi
    Wu, Hongming
    Qin, Shuhao
    Yu, Jie
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2022, 35 (02) : 249 - 260
  • [49] Polypropylene/thermoplastic polyurethane blends: mechanical characterizations, recyclability and sustainable development of thermoplastic materials
    Lin, Ting An
    Lin, Jia-Horng
    Bao, Limin
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03): : 5304 - 5312
  • [50] Mechanical properties evaluation of PVC/plasticizers and PVC/thermoplastic polyurethane blends from extrusion processing
    Pita, VJRR
    Sampaio, EEM
    Monteiro, EEC
    POLYMER TESTING, 2002, 21 (05) : 545 - 550
12345