Implementation of neural network for the thrust force prediction in hot drilling of 6082 aluminium alloy

被引：0
|
作者：
Donnini R. [1 ]
Montanari R. [1 ]
Santo L. [1 ]
Tagliaferri V. [1 ]
Ucciardello N. [1 ]
机构：
[1] Department of Mechanical Engineering, University of Rome Tor Vergata, Rome 00133
来源：
International Journal of Computational Materials Science and Surface Engineering | 2010年 / 3卷 / 2-3期
关键词：
Aluminium alloy; ANN; Artificial neural network; Hot drilling; Thrust force; Torque;
D O I：
10.1504/IJCMSSE.2010.033152
中图分类号：
学科分类号：
摘要：
A multilayered neural network have been implemented for predicting force in hot drilling of the 6082 aluminium alloy. Experimental tests were performed in dry drilling operation, using a conventional milling machine and HSS-Co 8% (DIN338) twist drills, 2.5, 5 and 7 mm in diameter. The spindle speed has been changed in the range 5,000-15,000 rev/min, the feed in the range 0.0076-0.042 mm/rev, the temperature in the range 25-140 ° C. As test temperature increases, a remarkable reduction in thrust forces was observed, low wear and no significant damage of the hole surface was also found. The influence of each parameter was investigated and a neural network was implemented for the force prediction obtaining a good agreement between experimental and numerical results. Copyright © 2010 Inderscience Enterprises Ltd.
引用
收藏
页码：175 / 187
页数：12
相关论文
共 50 条
  • [21] Prediction of thrust force in indexable drilling of aluminum alloys with machine learning algorithms
    Akdulum, Aslan
    Kayir, Yunus
    MEASUREMENT, 2023, 222
  • [22] Prediction of Thrust Force and Cutting Torque in Drilling Based on the Response Surface Methodology
    Kyratsis, Panagiotis
    Markopoulos, Angelos P.
    Efkolidis, Nikolaos
    Maliagkas, Vasileios
    Kakoulis, Konstantinos
    MACHINES, 2018, 6 (02)
  • [23] Critical thrust force prediction in unidirectional CFRP drilling: An analytical modeling approach
    Patel, Punit
    Chaudhary, Vijay
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2024, 238 (10) : 4513 - 4525
  • [24] Prediction of thrust force in CFRP composite drilling considering tool wear effect
    Chen Y.
    Chen Y.
    Yan C.
    Fan W.
    Xie S.
    Chen, Yan (ninaych@nuaa.edu.cn), 1600, Beijing University of Aeronautics and Astronautics (BUAA) (38): : 2207 - 2217
  • [25] Artificial neural network based tool condition monitoring in micro mechanical peck drilling using thrust force signals
    Patra, K.
    Jha, A. K.
    Szalay, T.
    Ranjan, J.
    Monostori, L.
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2017, 48 : 279 - 291
  • [26] Robust design of artificial neural network for roll force prediction in hot strip mill
    Kim, YS
    Yum, BJ
    Kim, M
    IJCNN'01: INTERNATIONAL JOINT CONFERENCE ON NEURAL NETWORKS, VOLS 1-4, PROCEEDINGS, 2001, : 2800 - 2804
  • [27] Prediction of thrust force and torque in canal preparation process using Taguchi method and Artificial Neural Network
    Guo, Weihao
    Wang, Liming
    Li, Jianfeng
    Li, Wenxiang
    Li, Fangyi
    Gu, Yu
    ADVANCES IN MECHANICAL ENGINEERING, 2021, 13 (10)
  • [28] Prediction of limit strains in hot forming of aluminium alloy sheets
    Bressan, Jose Divo
    Bruschi, Stefania
    Ghiotti, Andrea
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, 115 : 702 - 710
  • [29] Experimental Investigation of Thrust Force in the Drilling of Titanium Alloy Using Different Machining Techniques
    Ma, Lijie
    Ma, Zunyan
    Yu, Hui
    Li, Shenwang
    Pang, Minghua
    Wang, Zhankui
    METALS, 2022, 12 (11)
  • [30] Mechanical Properties Prediction for Hot Rolled Alloy Steel Using Convolutional Neural Network
    Xu, Zhi-Wei
    Liu, Xiao-Ming
    Zhang, Kai
    IEEE ACCESS, 2019, 7 : 47068 - 47078
12345