Creep-fatigue tests of double-end notched bar made of MOD.9CR-1MO steel

被引：0
|
作者：
Japan Atomic Energy Agency, O-arai, Ibaraki, Japan [1 ]
不详 [2 ]
不详 [3 ]
不详 [4 ]
机构：
来源：
Int Conf Nucl Eng Proc ICONE |
关键词：
Engineering Village;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Analytical investigations - Creep fatigue - Creep voids - High frequency induction heating - Japan Society of Mechanical Engineers - Mod.9Cr-1Mo steel - Radial temperature distribution - Sodium cooled fast reactors (SFR)
引用
收藏
相关论文
共 50 条
  • [41] Generation of creep-fatigue interaction diagram for modified 9Cr-1Mo steel
    Veerababu, J.
    Goyal, Sunil
    Vanaja, J.
    Nagesha, A.
    Vasudevan, M.
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2021, 191
  • [42] Creep-fatigue life evaluation for weldment of modified 9Cr-1Mo steel
    Nonaka, I
    Torihata, S
    Kihara, S
    ADVANCES IN FRACTURE RESEARCH, VOLS 1-6, 1997, : 307 - 315
  • [43] Development of Creep-Fatigue Evaluation Method for Modified 9Cr-1Mo Steel
    Takaya, Shigeru
    Nagae, Yuji
    Asayama, Tai
    JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2014, 136 (03):
  • [44] Evaluation of creep damage in heat affected zone of thick welded joint for Mod.9Cr-1Mo steel
    Li, Yongkui
    Hongo, Hiromichi
    Tabuchi, Masaaki
    Takahashi, Yukio
    Monma, Yoshio
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2009, 86 (09) : 585 - 592
  • [45] Precipitation of z-phase and precipitation sequence during creep deformation of Mod.9Cr-1Mo steel
    Suzuki, K
    Kumai, S
    Kushima, H
    Kimura, K
    Abe, F
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2003, 89 (06): : 691 - 698
  • [46] Thermal transient test and strength evaluation of a thick cylinder model made of Mod.9Cr-1Mo steel
    Ando, Masanori
    Hasebe, Shinnichi
    Kobayashi, Sumio
    Kasahara, Naoto
    Toyoshi, Akira
    Ohmae, Takahiro
    Enuma, Yasuhiro
    Nuclear Engineering and Design, 2013, 255 : 296 - 309
  • [47] Thermal transient test and strength evaluation of a thick cylinder model made of Mod.9Cr-1Mo steel
    Ando, Masanori
    Hasebe, Shinnichi
    Kobayashi, Sumio
    Kasahara, Naoto
    Toyoshi, Akira
    Ohmae, Takahiro
    Enuma, Yasuhiro
    NUCLEAR ENGINEERING AND DESIGN, 2013, 255 : 296 - 309
  • [48] Creep-fatigue evaluation method for weld joints of Mod.9Cr-1Mo steel. Part I: Proposal of the evaluation method based on finite element analysis and uniaxial testing
    Ando, Masanori
    Takaya, Shigeru
    NUCLEAR ENGINEERING AND DESIGN, 2017, 323 : 463 - 473
  • [49] Creep damage evaluation via uniaxial miniature testing for multiaxially stressed Mod.9Cr-1Mo steel components
    Matsubara, Naoki
    Sakane, Masao
    Itoh, Takamoto
    Kosaka, Rui
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2021, 194
  • [50] Type IV damage evaluation for Mod.9Cr-1Mo steel welds based on microscopic creep damage simulation
    Mitsubishi Heavy Industries, Ltd., Fukahori-machi 5-717-1, Nagasaki, 851-0392, Japan
    Nihon Kikai Gakkai Ronbunshu A, 1600, 789 (623-627):
12345