Validation of computations around high-lift configurations by structured- And unstructured-mesh

被引：0
|
作者：
Murayama, Mitsuhiro [1 ]
Yamamoto, Kazuomi [1 ]
Kobayashi, Kunihiko [2 ]
机构：
[1] Japan Aerospace Exploration Agency, Tokyo 182-8522, Japan
[2] Ryoyu Systems Company, Ltd., Tokyo 108-0074, Japan
来源：
Journal of Aircraft | 1600年 / 43卷 / 02期
关键词：
In this study; flow computations are performed on two-dimensional and three-dimensional high-lift configurations on multiblock structured and unstructured meshes. The objectives are to assess and improve the reliability in simulating the flow around such devices. First; two-dimensional computations on two-element and three-element airfoils are performed to investigate mesh dependency in detail. For unstructured meshes; this is carried out by using a mesh-refinement approach. The results show that sufficient mesh density away from the wing surface is required for accurate drag prediction because the flow has large circulation and wake. A mesh-refinement approach using entropy increment as the refinement indicator is also applied; and its effectiveness is validated. The method is effective in increasing the mesh points in the region of physical importance; such as wake; and the region where the numerical error is high. Three-dimensional computations on three-element trapezoidal wings with fuselage are also performed; and some modest grid studies are performed with structured meshes. Two configurations with full-span flap and part-span flap are used. Ways to improve the reliability of structured and unstructured meshes are discussed by comparing the results. The prediction of aerodynamic forces is quite reasonable even on the unstructured mesh at moderate settings of slat and flap; despite minor differences in local flow physics. However; it is also shown that the unstructured meshes should be further refined to resolve the wake near trailing edge; wing-tip vortices; and the flow separation at the juncture of the wing and body for more accurate prediction. Copyright © 2005 by the American Institute of Aeronautics and Astronautics; Inc. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：395 / 406
相关论文
共 50 条
  • [41] Detailed Characterisation, using PIV, of the Flow around an Airfoil in High-Lift Configuration
    Arnott, A
    Schneider, G
    Neitzke, KP
    Agocs, J
    Schröder, A
    Sammler, B
    Kompenhans, J
    PARTICLE IMAGE VELOCIMETRY: RECENT IMPROVEMENTS, 2004, : 31 - 42
  • [42] Computational Investigation of Conventional and Active-Flow-Control-Enabled High-Lift Configurations
    Vatsa, Veer N.
    Lin, John C.
    Melton, Latunia P.
    Lockard, David P.
    Ferris, Ryan
    JOURNAL OF AIRCRAFT, 2021, 58 (05): : 1137 - 1153
  • [43] Zonal-detached-eddy simulation of the flow around a high-lift configuration
    Deck, S. (sebastien.deck@onera.fr), 1600, American Inst. Aeronautics and Astronautics Inc. (43):
  • [44] High-lift devices for a delta wing installed around a trailing-edge
    Miyaji, K., 1600, American Inst. Aeronautics and Astronautics Inc. (40):
  • [45] High-lift devices for a delta wing installed around a trailing-edge
    Miyaji, K
    Arasawa, T
    JOURNAL OF AIRCRAFT, 2003, 40 (05): : 932 - 937
  • [46] Global Stability Analysis of a Compressible Turbulent Flow Around a High-Lift Configuration
    Iorio, M. C.
    Gonzalez, L. M.
    Martinez-Cava, A.
    AIAA JOURNAL, 2016, 54 (02) : 373 - 385
  • [47] Zonal-detached-eddy simulation of the flow around a high-lift configuration
    Deck, S
    AIAA JOURNAL, 2005, 43 (11) : 2372 - 2384
  • [48] Navier-Stokes simulations for transport aircraft wing/body high-lift configurations
    Chen, H.X., 1600, American Inst. Aeronautics and Astronautics Inc. (40):
  • [49] Numerical simulations for transport aircraft high-lift configurations using Cartesian grid methods
    Sang, Weimin
    Li, Fengwei
    JOURNAL OF AIRCRAFT, 2006, 43 (04): : 1103 - 1111
  • [50] Turbulence Structure around an Asymmetric High-Lift Airfoil for Different Incidence Angles
    Solis-Gallego, I.
    Meana-Fernandez, A.
    Fernandez Oro, J. M.
    Arguelles Diaz, K. M.
    Velarde-Suarez, S.
    JOURNAL OF APPLIED FLUID MECHANICS, 2017, 10 (04) : 1013 - 1027
12345