Finite element analysis of principal axle of the driving system of twin screw refiner by ansys

被引：0
|
作者：
State Key Lab. of Engines, Tianjin University, Tianjin 300072, China [1 ]
不详 [2 ]
机构：
来源：
Zhongguo Zaozh Xuebao | 2007年 / 3卷 / 77-80期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
On the basis of analyzing the structure and calculating the load of the principal axle of the system of twin screw refiner, the static finite element analysis and stress analysis for the shaft of the driving system is carried out by using ANSYS and the stress distribution and deformation distribution of the shaft are obtained. Rational arrangement of redial bearing is put forward after investigating various supports.
引用
收藏
相关论文
共 50 条
  • [21] Finite Element Analysis On Tower Crane Based On ANSYS
    Liu Qing
    Zeng Yihui
    DIGITAL MANUFACTURING & AUTOMATION III, PTS 1 AND 2, 2012, 190-191 : 373 - +
  • [22] Finite element analysis of PEMFC assembling based on ANSYS
    Hu, Guilin
    Wu, Xiaojun
    Suo, Yange
    Xia, Yuzhen
    Xu, Yousheng
    Zhang, Zhiguo
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2018, 13 (02): : 2080 - 2089
  • [23] Finite element analysis for SRC columns by ANSYS program
    Wang, Yan-Hong
    Xue, Jian-Yang
    Zhao, Hong-Tie
    Yang, Yong
    Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2003, 35 (SUPPL.): : 109 - 112
  • [24] Finite Element Analysis of Traction gear using ANSYS
    Silori, Praveen
    Shaikh, Amir
    Kumar, Nithin K. C.
    Tandon, Tushar
    MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) : 2236 - 2245
  • [25] Rigid Finite Element Modeling of Ball Screw System
    Li, Yihao
    Jiang, Wei
    MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 1006 - 1010
  • [26] Finite element modal analysis of ground driving system for progressing cavity pump
    College of Mechanical Science and Engineering, Daqing Petroleum Institute, Daqing 163318, China
    Shiyou Xuebao, 2007, 4 (142-144):
  • [27] Finite element analysis of drum of horizontal screw centrifuge
    Changsha University of Science and Technology, Changsha 410076, China
    不详
    Zhongguo Jixie Gongcheng, 2006, 23 (2454-2457):
  • [28] Finite Element Analysis of Press Casing of Screw Press
    Li, Shilong
    Hu, Zhigang
    ADVANCES IN ENGINEERING DESIGN AND OPTIMIZATION III, PTS 1 AND 2, 2012, 201-202 : 513 - 516
  • [29] Finite element analysis of the axial stiffness of a ball screw
    Zhou, L-X
    Li, P-Y
    2018 INTERNATIONAL CONFERENCE ON MATERIAL STRENGTH AND APPLIED MECHANICS (MSAM 2018), 2018, 372
  • [30] Stability of zygomatic plate-screw orthodontic anchorage system - A finite element analysis
    Veziroglu, Firdevs
    Uckan, Sina
    Ozden, Utku Ahmet
    Arman, Ayca
    ANGLE ORTHODONTIST, 2008, 78 (05) : 902 - 907
12345