Cutter accessibility map and its application for 5-axis milling tool-path generation

被引：0
|
作者：
Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore [1 ]
机构：
来源：
Wuhan Ligong Daxue Xuebao | 2006年 / SUPPL. 1卷 / 40-47期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [41] Tool Path Generation Method of Complex Surface 5-axis Machining
    Li, Huiying
    Chen, Liangji
    Proceedings of the 2016 International Conference on Electrical, Mechanical and Industrial Engineering (ICEMIE), 2016, 51 : 197 - 200
  • [42] CL surface deformation approach for a 5-axis tool path generation
    Su-Jin Kim
    Dong-Yoon Lee
    Hyun-Chul Kim
    Sung-Gun Lee
    Min-Yang Yang
    The International Journal of Advanced Manufacturing Technology, 2006, 28 : 509 - 517
  • [43] Direct 5-axis tool-path generation from point cloud input using 3D biarc fitting
    Chui, K. L.
    Chiu, W. K.
    Yu, K. M.
    ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2008, 24 (02) : 270 - 286
  • [44] Interference free surgical tool-path generation in multi-axis bone milling robot
    Sugita, Naohiko
    Nakano, Taiga
    Nakajima, Yoshikazu
    Fujiwara, Kazuo
    Abe, Nobuhiro
    Ozaki, Toshifumi
    Suzuki, Masahiko
    Mitsuishi, Mamoru
    2010 3RD IEEE RAS AND EMBS INTERNATIONAL CONFERENCE ON BIOMEDICAL ROBOTICS AND BIOMECHATRONICS, 2010, : 790 - 795
  • [45] 5-axis Flank Milling Tool Path Smoothing Based on Kinematical Behaviour Analysis
    Beudaert, Xavier
    Pechard, Pierre-Yves
    Tournier, Christophe
    MODELLING OF MACHINING OPERATIONS, 2011, 223 : 691 - +
  • [46] Forming a spherical hob cutter in a general 5-axis milling machine
    Hu, Zhan-Qi
    Cui, Yun-Qi
    Li, Yu-Kun
    Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2009, 30 (09): : 1047 - 1050
  • [47] Tool path planning for 5-axis flank milling based on dynamic programming techniques
    Wu, Ping-Han
    Li, Yu-Wei
    Chu, Chih-Hsing
    ADVANCES IN GEOMETRIC MODELING AND PROCESSING, 2008, 4975 : 570 - 577
  • [48] INTEGRATED SIMULATION, ERROR ASSESSMENT, AND TOOL PATH CORRECTION FOR 5-AXIS NC MILLING
    HUANG, YC
    OLIVER, JH
    JOURNAL OF MANUFACTURING SYSTEMS, 1995, 14 (05) : 331 - 344
  • [49] Raster milling tool-path generation from STL files
    Qu, XZ
    Stucker, B
    RAPID PROTOTYPING JOURNAL, 2006, 12 (01) : 4 - 11
  • [50] CC Path Generation Method in 5-axis Surface Machining with a Flat-end Cutter
    Chen, Liangji
    Feng, Xianzhang
    MANUFACTURING PROCESSES AND SYSTEMS, PTS 1-2, 2011, 148-149 : 172 - 176
12345