5-axis plunge milling path planning of closed blisk

被引：0
|
作者：
Ren, Junxue [1 ]
Xie, Zhifeng [1 ]
Liang, Yongshou [1 ]
Yao, Changfeng [1 ]
Liu, Bo [1 ]
机构：
[1] The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Northwestern Polytechnical University, Xi'an 710072, China
来源：
Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica | 2010年 / 31卷 / 01期
关键词：
Motion planning;
D O I：
暂无
中图分类号：
TG506 [金属切削加工工艺];
学科分类号：
摘要：
With regard to the slot process of closed blisk, a 5-axis slot plunge milling method of closed blisk is studied. First, this article analyzes the machinability of blisk channel and proposes the channel region division method. Then, the algorithm to solve the best ruled generatrix of plunging milling channel boundary is presented based on the least area principle. The method is addressed to generate the ruled envelope surfaces in view of blade-offset-surfaces and internal and external ring-offset-surfaces, respectively. 5-axis plunge milling tool path of closed blisk is presented finally. The results show that the channel region division and the ruled envelope surface generating can be solved by this approach, and the slot plunge milling of closed blisk can be achieved effectively.
引用
收藏
页码：210 / 216
相关论文
共 50 条
  • [41] New Findings in 5-Axis Milling.
    Henning, H.
    Sanzenbacher, M.
    1600, (66):
  • [42] INTEGRATED SIMULATION, ERROR ASSESSMENT, AND TOOL PATH CORRECTION FOR 5-AXIS NC MILLING
    HUANG, YC
    OLIVER, JH
    JOURNAL OF MANUFACTURING SYSTEMS, 1995, 14 (05) : 331 - 344
  • [43] Tool path generation of 5-axis CNC whirlwind milling model for freeform surfaces
    Yi, Xianzhong
    Qi, Haiying
    Liu, Qiang
    Yi, Xianbing
    2005 IEEE International Conference on Mechatronics and Automations, Vols 1-4, Conference Proceedings, 2005, : 537 - 540
  • [44] 5-AXIS PERIPHERAL MILLING WITH SHAPED CUTTERS
    SCHMATZ, W
    SCHMEER, E
    KOHL, R
    WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1979, 69 (01): : 1 - 3
  • [45] Efficient tool path planning for machining an impeller with a 5-axis NC machine
    Feng, Junran
    Dai, Xing
    Cheng, Yongzhi
    Xiong, Caihua
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1, 2, 2011, 156-157 : 570 - 574
  • [46] Curved layer path planning on a 5-axis 3D printer
    Duarte, Joao
    Santo, Isabel Espirito
    Monteiro, M. Teresa T.
    Vaz, A. Ismael F.
    RAPID PROTOTYPING JOURNAL, 2022, 28 (04) : 629 - 636
  • [47] 5-axis CNC tool path planning and optimal feedrate planning based on kinematic constraints
    Ma, Hongyu
    ACM COMMUNICATIONS IN COMPUTER ALGEBRA, 2021, 55 (03): : 119 - 120
  • [48] Tool design and cutting parameters optimisation for plunge milling blisk
    Cheng, Yaonan
    Yang, Jinlong
    Zuo, Diange
    Song, Xu
    Feng, Xinmin
    INTERNATIONAL JOURNAL OF MANUFACTURING RESEARCH, 2020, 15 (03) : 266 - 284
  • [49] Cutter accessibility map and its application for 5-axis milling tool-path generation
    Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576, Singapore
    Wuhan Ligong Daxue Xuebao, 2006, SUPPL. 1 (40-47):
  • [50] Cutter accessibility map and its application for 5-axis milling tool-path generation
    Li, L. L.
    Zhang, Y. F.
    1ST INTERNATIONAL SYMPOSIUM ON DIGITAL MANUFACTURE, VOLS 1-3, 2006, : 40 - 47
12345