Moisture absorption modeling using design of experiments

被引：0

作者：

Yong, Virginia ^{[1
]}

Hahn, H. Thomas ^{[1
,2
]}

机构：

[1] Materials Science and Engineering Department, University of California, Los Angeles, CA 90095

[2] Mechanical and Aerospace Engineering Department, University of California, Los Angeles, CA 90095

来源：

Journal of Applied Polymer Science | 1600年 / 103卷 / 03期

关键词：

The effect of temperature and humidity on equilibrium moisture content of laminates was studied by response surface design. Two glass fabric-reinforced laminated composite materials with different epoxy matrix resins; laminates A and B; were studied. Laminates A and B used are cyanate ester and polyphenylene oxide modified epoxy based laminate; respectively. The results show that the response surface profiles of moisture absorption for the two laminate materials are similar though their amounts of moisture absorption are different. The temperature-humidity interaction effect and the quadratic effect of tempera ture are significant for laminate A. However; only the linear effects of temperature and humidity are significant for laminate B. Predictive models relating the important factors to the equilibrium moisture content were proposed in the article. The models developed can be used to predict and assess the reliability of the laminates for moisture related failures. © 2006 Wiley Periodicals; Inc;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：1539 / 1543

共 50 条

[41] Design, Modeling and Experiments of a Modular Robotic Finger
Zhang, Qinjian
Wang, Pengcheng
Li, Haiyuan
Li, Xingshuai
INTELLIGENT ROBOTICS AND APPLICATIONS (ICIRA 2022), PT I, 2022, 13455 : 564 - 574
[42] Design of Experiments for the Modeling of the Phenol Adsorption Process
Hamaidi-Maouche, N.
Bourouina-Bacha, S.
Oughlis-Hammache, F.
JOURNAL OF CHEMICAL AND ENGINEERING DATA, 2009, 54 (10): : 2874 - 2880
[43] Design of experiments within the Mobius modeling environment
Courtney, Tod
Gaonkar, Shravan
McQuinn, Michael G.
Rozier, Eric
Sanders, William H.
Webster, Patrick
FOURTH INTERNATIONAL CONFERENCE ON THE QUANTITATIVE EVALUATION OF SYSTEMS, 2007, : 161 - +
[44] CORRECTED OPTIMUM DESIGN OF EXPERIMENTS ON EXPONENTIAL ABSORPTION USING MORE THAN ONE ABSORBER THICKNESS
BURGE, EJ
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 1984, 227 (01): : 115 - 125
[45] Modeling the mechanical degradation due to moisture absorption in polymer matrix composites
Papanicolaou, George
Fotou, Petros
Zetos, Anastasios
UPB Scientific Bulletin, Series D: Mechanical Engineering, 2016, 78 (01): : 37 - 48
[46] Dual stage modeling of moisture absorption and desorption in epoxy mold compounds
Placette, Mark D.
Fan, Xuejun
Zhao, Jie-Hua
Edwards, Darvin
MICROELECTRONICS RELIABILITY, 2012, 52 (07) : 1401 - 1408
[47] Using design of experiments in validation
Bandurek, GR
BIOPHARM INTERNATIONAL, 2005, 18 (05) : 40 - +
[48] MODELING AND OPTIMIZATION OF LACTIC FERMENTATION PROCESS IN THE PRESENCE OF ANIONIC CLAYS USING EXPERIMENTS DESIGN
Arus, Vasilica Alisa
Nistor, Ileana Denisa
Ursu, Alina Violeta
Isopencu, Gabriela
Jinescu, Cosmin
Mares, Monica
UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES B-CHEMISTRY AND MATERIALS SCIENCE, 2011, 73 (01): : 15 - 28
[49] Experimental modeling and optimization of the active neutralization of a PP film, using design of experiments methodology
Messaoudene, Akila
Mekideche, Mohamed Rachid
Bendahmane, Boukhalfa
Tabti, Belaid
Medles, Karim
Dascalescu, Lucian
2019 IEEE INDUSTRY APPLICATIONS SOCIETY ANNUAL MEETING, 2019,
[50] Modeling of Single-Ended Interconnects Using Surrogate Model and Design of Experiments Techniques
Moreno-Mojica, Aurea E.
Brito-Brito, Zabdiel
2016 13TH INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING, COMPUTING SCIENCE AND AUTOMATIC CONTROL (CCE), 2016,

← 1 2 3 4 5 →