Modifications of the rigid polyurethane - Polyisocyanurate foams

被引：0
|
作者：
Czupryński, Boguslaw [1 ]
Paciorek-Sadowska, Joanna [1 ]
Liszkowska, Joanna [1 ]
机构：
[1] Casimir the Great Academy of Bydgoszcz, Chodkiewicza str. 30, 85-064 Bydgoszcz, Poland
来源：
Journal of Applied Polymer Science | 2006年 / 100卷 / 03期
关键词：
The method of boroorganic compounds preparation by esterification of boric acid and glycols has been presented. The obtained compounds tri(2-hydroxybutyl) borate; tri(hydroxythiodiethylene)borate; tri[(3-chloro-2-hydroxy-1-propoxy)-1-; methylpropyl]borate; and tri[3-chloro-2-hydroxy-l-propoxy)thiodiethyl]borate were used to produce the rigid polyurethane-polyisocyanurate (PUR-PIR) foams. The foams were prepared by one-stage method and the amount of borates added varied; within the range from 0.0 to 0.4 of chemical equivalent. The method of preparation; determination of foaming parameters; and methods of testing of the physicochemical properties of PUR-PIR foams as well as their results have been presented. A special emphasiswas put on reduction of the foam flammability. It was found that application of the obtained compounds as polyolic components has a favorable effect on the properties of the produced rigid PUR-PIR foams. The obtained rigid PUR-PIR foams were characterized by a higher compressive strength; lower brittleness; considerably reduced flammability; and higher content of the closed cells. © 2006 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：2020 / 2029
相关论文
共 50 条
  • [21] Glycolysis of rigid aluminium hydroxide-modified polyurethane-polyisocyanurate foams
    Czuprynski, Boguslaw
    Liszkowska, Joanna
    Paciorek-Sadowska, Joanna
    PRZEMYSL CHEMICZNY, 2008, 87 (11): : 1107 - 1114
  • [22] Studies on utilization of potato slops in the production of rigid polyurethane-polyisocyanurate foams
    Czuprynski, B
    Klosowski, G
    Kotarska, K
    Sadowska, J
    POLIMERY, 2000, 45 (06) : 439 - 441
  • [23] Rigid polyurethane-polyisocyanurate foams modified with grain fraction of fly ashes
    Paciorek-Sadowska, Joanna
    Czuprynski, Boguslaw
    Borowicz, Marcin
    Liszkowska, Joanna
    JOURNAL OF CELLULAR PLASTICS, 2020, 56 (01) : 53 - 72
  • [24] FIRE PERFORMANCE OF POLYISOCYANURATE RIGID FOAMS
    DENISSOV, AW
    ZITINKINA, AK
    APPENROTH, H
    PLASTE UND KAUTSCHUK, 1984, 31 (04): : 140 - 142
  • [25] Fractionated and purified hybrid poplar lignins as a polyol replacement in rigid polyurethane/polyisocyanurate foams
    Henry, Christian
    Tindall, Graham
    Thies, Mark C.
    Nejad, Mojgan
    JOURNAL OF APPLIED POLYMER SCIENCE, 2023, 140 (45)
  • [26] Properties of rigid polyurethane-polyisocyanurate foams prepared under addition of their glycolysis products
    Czuprynski, Boguslaw
    Liszkowska, Joanna
    Paciorek-Sadowska, Joanna
    Lewandowski, Rafal
    PRZEMYSL CHEMICZNY, 2010, 89 (05): : 734 - 741
  • [27] The utilization of rigid polyurethane-polyisocyanurate foams by the combined alcoholysis-aminolysis process
    Czuprynski, B
    Paciorek-Sadowska, J
    Liszkowska, J
    Czuprynska, J
    POLIMERY, 2002, 47 (02) : 104 - 109
  • [28] Effect of selected boroorganic compounds and fillers on thermal properties of rigid polyurethane - Polyisocyanurate foams
    Czuprynski, Boguslaw
    Liszkowska, Joanna
    Paciorek-Sadowska, Joanna
    JOURNAL OF POLYMER ENGINEERING, 2006, 26 (06) : 589 - 604
  • [29] Effect of selected boroorganic compounds on thermal and heat properties of rigid polyurethane-polyisocyanurate foams
    Czuprynski, B
    Liszkowska, J
    Paciorek-Sadowska, J
    JOURNAL OF APPLIED POLYMER SCIENCE, 2005, 95 (02) : 400 - 403
  • [30] Effect of selected boroorganic compounds on thermal and heat properties of rigid polyurethane-polyisocyanurate foams
    Czupryński, Boguslaw
    Liszkowska, Joanna
    Paciorek-Sadowska, Joanna
    Journal of Applied Polymer Science, 2005, 95 (02): : 400 - 403
12345