Boride-nitride hardening of metal deposited by high-chromium flux-cored wire

被引：0
|
作者：
Eremin E.N. [1 ]
Losev A.S. [1 ]
Borodikhin S.A. [1 ]
机构：
[1] Omsk State Technical University, Omsk
来源：
| 1600年 / Taylor and Francis Ltd.卷 / 34期
关键词：
borides; hardening; hardness; high-chromium flux-cored wire; structure; Surfacing; wearing resistance;
D O I：
10.1080/09507116.2021.1919445
中图分类号：
学科分类号：
摘要：
The influence of a complex of boron and nitrogen compounds on the structure, phase composition and properties of a metal deposited by a high-chromium flux-cored wire has been studied. It is shown that the formation of a composite structure with an iron-chromium martensitic matrix, an eutectic component based on boride (Fe, Cr)2B, nitrides ε-(Fе, Cr)2–3N, nitrides and carbides of titanium and zirconium, causes high wear resistance of the deposited coatings. A flux-cored wire for surfacing corrosion-resistant coatings on parts of equipment under conditions of metal friction against metal was suggested. © 2021 Informa UK Limited, trading as Taylor & Francis Group.
引用
收藏
页码：74 / 79
页数：5
相关论文
共 50 条
  • [21] EFFECT OF THE YTTRIUM CONTENT OF FLUX-CORED WIRE ON THE STRUCTURE OF DEPOSITED CAST IRON.
    Lyubich, A.I.
    Sytnik, N.M.
    Anikin, A.A.
    Welding Production (English translation of Svarochnoe Proizvodstvo), 1983, 30 (06): : 10 - 11
  • [22] THE TRANSFER OF ELECTRODE METAL IN DEPOSITION WITH A SELF-SHIELDING FLUX-CORED WIRE
    BILYK, GB
    KARPENKO, VM
    KATRENKO, VT
    WELDING PRODUCTION, 1979, 26 (12): : 7 - 10
  • [23] A FLUOROPLASTIC MATERIAL IN FLUX-CORED STRIP TO REDUCE THE HYDROGEN CONTENT OF DEPOSITED METAL
    CHIGAREV, VV
    OSTROUSHKO, AV
    AUTOMATIC WELDING USSR, 1985, 38 (01): : 41 - 43
  • [24] Effect of Chromium Carbide on the Structure of a Sprayed Metal upon Its Introduction into the Composition of a Filler Flux-Cored Wire Charge
    Kobernik, N. V.
    Pankratov, A. S.
    Petrova, V. V.
    Sorokin, S. P.
    Galinovskii, A. L.
    Orlik, A. G.
    Stroitelev, D. V.
    RUSSIAN METALLURGY, 2022, 2022 (13): : 1836 - 1841
  • [25] Effect of Chromium Carbide on the Structure of a Sprayed Metal upon Its Introduction into the Composition of a Filler Flux-Cored Wire Charge
    N. V. Kobernik
    A. S. Pankratov
    V. V. Petrova
    S. P. Sorokin
    A. L. Galinovskii
    A. G. Orlik
    D. V. Stroitelev
    Russian Metallurgy (Metally), 2022, 2022 : 1836 - 1841
  • [26] Effect of Heat Input on Toughness of Deposited Metal at-40°C of Self-shielded Flux-cored Wire
    Song, Shaopeng
    Li, Zhuoxin
    Li, Guodong
    Zhang, Tianli
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 979 - 983
  • [27] Metal-arc active gas welding in the high power range with flux-cored wire electrodes
    Dilthey, Ulrich
    Borner, Albrecht
    Reisgen, Uwe
    Schweissen und Schneiden/Welding and Cutting, 1996, 48 (03):
  • [28] Heat resistance of the metal deposited by flux-cored wire 10G7M3S2AFTYu
    Eremin, Evgeniy
    Losev, Alexander
    Borodikhin, Sergey
    Ponomarev, Ivan
    Matalasova, Arina
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 1354 - 1357
  • [29] Development of a high-toughness self-shielded flux-cored wire
    Zhang, Zhi
    Zhang, Wenyue
    Chen, Banggu
    Xi'an Jianzhu Keji Daxue Xuebao/Journal of Xi'an University of Architecture & Technology, 1996, 28 (04): : 71 - 75
  • [30] Metal transfer in underwater flux-cored wire wet welding at shallow water depth
    Guo, Ning
    Wang, Meirong
    Du, Yongpeng
    Guo, Wei
    Feng, Jicai
    MATERIALS LETTERS, 2015, 144 : 90 - 92
12345