Boride-nitride hardening of metal deposited by high-chromium flux-cored wire

被引：0
|
作者：
Eremin E.N. [1 ]
Losev A.S. [1 ]
Borodikhin S.A. [1 ]
机构：
[1] Omsk State Technical University, Omsk
来源：
| 1600年 / Taylor and Francis Ltd.卷 / 34期
关键词：
borides; hardening; hardness; high-chromium flux-cored wire; structure; Surfacing; wearing resistance;
D O I：
10.1080/09507116.2021.1919445
中图分类号：
学科分类号：
摘要：
The influence of a complex of boron and nitrogen compounds on the structure, phase composition and properties of a metal deposited by a high-chromium flux-cored wire has been studied. It is shown that the formation of a composite structure with an iron-chromium martensitic matrix, an eutectic component based on boride (Fe, Cr)2B, nitrides ε-(Fе, Cr)2–3N, nitrides and carbides of titanium and zirconium, causes high wear resistance of the deposited coatings. A flux-cored wire for surfacing corrosion-resistant coatings on parts of equipment under conditions of metal friction against metal was suggested. © 2021 Informa UK Limited, trading as Taylor & Francis Group.
引用
收藏
页码：74 / 79
页数：5
相关论文
共 50 条
  • [1] Effect of the Boride-Nitride Hardening on the Structure and Properties of Chromium Steel Deposited with a Flux-Cored Wire
    Eremin, E. N.
    Losev, A. S.
    Borodikhin, S. A.
    Ivlev, K. Ye.
    OIL AND GAS ENGINEERING (OGE-2017), 2017, 1876
  • [2] An austenitic flux-cored wire for welding hardening steels
    Weld Int, 2 (147):
  • [3] Structural transformations of martensitic class coatings deposited by a flux-cored wire with carbide-boride-nitride doping during tempering
    Eremin, E. N.
    Losev, A. S.
    Borodikhin, S. A.
    Ponomarev, I. A.
    Matalasova, A. E.
    XII INTERNATIONAL SCIENTIFIC AND TECHNICAL CONFERENCE APPLIED MECHANICS AND SYSTEMS DYNAMICS, 2019, 1210
  • [4] CALCULATING THE COMPOSITION OF METAL DEPOSITED WITH A SELF-SHIELDING FLUX-CORED WIRE
    KARPENKO, VM
    BILYK, GB
    LIVSHITS, MG
    WELDING PRODUCTION, 1983, 30 (06): : 43 - 44
  • [5] Effect of Chromium Carbide on the Structure and Properties of Weld-Deposited Metal Introduced into the Charge Mixture of a Flux-Cored Wire
    Kobernik N.V.
    Pankratov A.S.
    Sorokin S.S.
    Petrova V.V.
    Galinovskii A.L.
    Orlik A.G.
    Stroitelev D.V.
    Steel in Translation, 2023, 53 (09) : 761 - 766
  • [6] Influence of Silicon Carbide Introduced into a Flux-Cored Wire Charge on Deposited Metal Structure
    N. V. Kobernik
    A. L. Galinovskii
    I. N. Kravchenko
    A. G. Orlik
    V. V. Alexandrova
    Y. V. Andriyanov
    A. D. Bykova
    Metallurgist, 2023, 67 : 201 - 208
  • [7] Influence of Silicon Carbide Introduced into a Flux-Cored Wire Charge on Deposited Metal Structure
    Kobernik, N. V.
    Galinovskii, A. L.
    Kravchenko, I. N.
    Orlik, A. G.
    Alexandrova, V. V.
    Andriyanov, Y. V.
    Bykova, A. D.
    METALLURGIST, 2023, 67 (1-2) : 201 - 208
  • [8] Effect of trace elements on toughness of deposited metal of self-shielded flux-cored wire
    2000, Sci Publ House (21):
  • [9] Structure and Properties of the Metal Deposited Using a Filler Flux-Cored Powder Wire with Titanium Carbide
    N. V. Kobernik
    A. S. Pankratov
    Yu. V. Andriyanov
    A. G. Orlik
    V. V. Aleksandrova
    A. L. Galinovskii
    Russian Metallurgy (Metally), 2024, 2024 (6) : 1262 - 1267
  • [10] Effect of trace elements on toughness of deposited metal of self-shielded flux-cored wire
    Hu, Qiang
    Xiong, Dijing
    Shi, Yaowu
    Han Jie/Welding & Joining, 2000, (02): : 15 - 18
12345