Study on coatings formed on the pre-oxidized NiTi wires by micro-arc oxidation

被引:0
|
作者
Ge, Zhen-Dong [1 ]
Zhao, Hong [1 ]
Guan, Shao-Xuan [2 ]
Tian, Cui-Cui [1 ]
Qi, Min [1 ]
Yang, Da-Zhi [1 ]
机构
[1] Dep. of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China
[2] Institute of Metal Research Chinese Academy of Sciences, Shenyang 110016, China
来源
关键词
Titanium alloys - Blood - Wire - Oxidation - Pore size - Binary alloys;
D O I
暂无
中图分类号
学科分类号
摘要
Well-distributed micro porous coatings with Ca, P component were prepared by micro-arc oxidation (MAO) on the surface of oxidized state NiTi wires. The coatings in different treatment time were observed and tested by SEM and EPMA, and the blood compatibility of coatings was studied. As to the pre-oxidized NiTi wires after MAO treatment, the ratio of Ti/Ni and Ca, P content in coatings raised with the prolonged oxidation time. After MAO for 20 seconds good quality and well-distributed micro porous coatings were acquired. The average pore size of micro porous on surface was about 1μm, and no crack was found on the surface of coatings. The platelet adhesion test showed superior blood compatibility of the coatings.
引用
收藏
页码:1036 / 1038
相关论文
共 50 条
  • [1] Effects of hypophosphate concentrations on the characteristics of micro-arc oxidation coatings formed on biomedical NiTi alloy
    Xu, Jilin
    Luo, Junming
    Liu, Fu
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 240 - +
  • [2] Alumina coating formed on medical NiTi alloy by micro-arc oxidation
    Xu, J. L.
    Liu, F.
    Wang, F. P.
    Zhao, L. C.
    MATERIALS LETTERS, 2008, 62 (25) : 4112 - 4114
  • [3] Effects of cathodic voltages on the structure and properties of ceramic coatings formed on NiTi alloy by micro-arc oxidation
    Liu, F.
    Xu, J. L.
    Yu, D. Z.
    Wang, F. P.
    Zhao, L. C.
    MATERIALS CHEMISTRY AND PHYSICS, 2010, 121 (1-2) : 172 - 177
  • [4] Wear resistance of micro-arc oxidation coatings on biomedical NiTi alloy
    Liu, F.
    Xu, J. L.
    Yu, D. Z.
    Wang, F. P.
    Zhao, L. C.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 487 (1-2) : 391 - 394
  • [5] Study of Microhardness of Ceramic Coatings Formed on 6061 Aluminum Alloy by Micro-arc Oxidation
    Wang, X. -D.
    Wu, X. -H.
    Wang, Rui
    2011 INTERNATIONAL CONFERENCE ON FUZZY SYSTEMS AND NEURAL COMPUTING (FSNC 2011), VOL VII, 2011, : 388 - 391
  • [6] Study of Microhardness of Ceramic Coatings Formed on 6061 Aluminum Alloy by Micro-arc Oxidation
    Wang, X. -D.
    Wu, X. -H.
    Wang, Rui
    2011 AASRI CONFERENCE ON ARTIFICIAL INTELLIGENCE AND INDUSTRY APPLICATION (AASRI-AIIA 2011), VOL 4, 2011, : 399 - 402
  • [7] Effects of NaAlO2 concentrations on structure and characterization of micro-arc oxidation coatings formed on biomedical NiTi alloy
    Liu, Fu
    Shimizu, Tadao
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2010, 118 (1374) : 113 - 117
  • [8] Influence of oxidation time on microstructure and composition of micro-arc oxidation coatings formed on zirconium
    Lan, R.
    Dong, L.
    Wang, C.
    Liang, T.
    Tian, J.
    MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 123 - 127
  • [9] Biomimetic deposition of apatite coatings on micro-arc oxidation treated biomedical NiTi alloy
    Liu, Fu
    Xu, Jilin
    Wang, Fuping
    Zhao, Liancheng
    Shimizu, Tadao
    SURFACE & COATINGS TECHNOLOGY, 2010, 204 (20): : 3294 - 3299
  • [10] Study on Micro-Arc Oxidized Coatings on Magnesium in Three Different Electrolytes
    Mu Weiyi
    Han Yong
    RARE METAL MATERIALS AND ENGINEERING, 2010, 39 (07) : 1129 - 1134