Effects of tool edge geometry on cutting temperature in continuous cutting of case hardened steel

被引：0
|
作者：
Tanaka, Ryutaro [1 ]
Hosokawa, Akira [2 ]
Furumoto, Tatsuaki [2 ]
Ueda, Takashi [2 ]
机构：
[1] Graduate School of Engineering, Hiroshima University, 1-4-1 Kagamiyama, Higashi-Hiroshima, Hiroshima 739-8527, Japan
[2] Institute of Science and Engineering, Kanazawa University, Kakuma-machi, Kanazawa, Ishikawa 920-1192, Japan
来源：
International Journal of Automation Technology | 2013年 / 7卷 / 03期
关键词：
D O I：
10.20965/ijat.2013.p0313
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：313 / 320
相关论文
共 50 条
  • [31] Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel
    Özel, T
    Hsu, TK
    Zeren, E
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 25 (3-4): : 262 - 269
  • [32] Influences of tool rake angle and cutting speed on ceramic tool failure in continuous and intermittent turning of hardened steel
    Cui, Xiaobin
    Wang, Dong
    Guo, Jingxia
    CERAMICS INTERNATIONAL, 2016, 42 (10) : 12390 - 12400
  • [33] Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel
    Tugrul Özel
    Tsu-Kong Hsu
    Erol Zeren
    The International Journal of Advanced Manufacturing Technology, 2005, 25 : 262 - 269
  • [34] The cutting tool stresses in finish turning of hardened steel with mixed ceramic tool
    Kurt, Abdullah
    Yalcin, Bekir
    Yilmaz, Nihat
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 80 (1-4): : 315 - 325
  • [35] Modeling and verification of cutting tool temperatures in rotary tool turning of hardened steel
    Dessoly, V
    Melkote, SN
    Lescaller, C
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (14): : 1463 - 1470
  • [36] The cutting tool stresses in finish turning of hardened steel with mixed ceramic tool
    Abdullah Kurt
    Bekir Yalçin
    Nihat Yilmaz
    The International Journal of Advanced Manufacturing Technology, 2015, 80 : 315 - 325
  • [37] BUILT-UP EDGE ELIMINATION IN MIRROR CUTTING OF HARDENED STEEL
    OISHI, K
    JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1995, 117 (01): : 62 - 66
  • [38] Built-up edge elimination in mirror cutting of hardened steel
    Oishi, K.
    Journal of engineering for industry, 1995, 117 (01): : 62 - 66
  • [39] CUTTING EDGE WEAR OF TUNGSTEN CARBIDE TOOL IN CONTINUOUS AND INTERRUPTED CUTTING OF A POLYMER COMPOSITE
    WANG, DH
    WERN, CW
    RAMULU, M
    ROGERS, E
    MATERIALS AND MANUFACTURING PROCESSES, 1995, 10 (03) : 493 - 508
  • [40] CUTTING FORCE CHARACTERISTICS IN MACHINING OF HARDENED STEEL - RELATIONSHIP BETWEEN CUTTING FORCE AND TOOL WEAR AND FRACTURE
    OHTANI, T
    FUJISE, K
    YOKOGAWA, H
    BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1986, 20 (02): : 127 - 129
12345