Tensile mechanical properties of SiCp/Al composites

被引：0

作者：

Kang, Xinmeng ^{[1
]}

Cheng, Xiaoquan ^{[1
]}

Li, Zhengneng ^{[1
]}

Zhang, Jikui ^{[1
]}

Hu, Renwei ^{[1
]}

Cui, Yan ^{[2
]}

机构：

[1] School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China

[2] Beijing Institute of Aeronautical Materials, Beijing 100095, China

来源：

Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2009年 / 26卷 / 04期

关键词：

High volume fraction - Loading and unloading - SiCp - SiCp/Al composites - Simulated results - Tensile failures - Tensile mechanical properties - Tension;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The experimental study was performed on tensile strength of high volume fraction SiCp/Al composites. The results show that the loading and unloading processes have little effect on the tensile strength of high volume fraction SiCp/Al composites. An FEM model was established to simulate the tensile properties of SiCp/Al composites. The simulated results show that low volume fraction SiCp/Al composites mainly represent plastic mechanical properties. On the contrary, high volume fraction SiCp/Al composites mainly represent the brittle mechanical properties. The errors of the tensile strength got from the model are little compared with the testing results. Breakage of matrix is the main factor of high volume fraction SiCp/Al composites tensile failure.

引用

页码：83 / 88

共 50 条

[41] Effect of heat treatment on tensile deformation behavior of SiCp/Al composites
Luo, Si-Jun
Chen, Kang-Hua
Zhu, Chang-Jun
Xie, Can-Qiang
Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2009, 14 (04): : 265 - 269
[42] The effect of matrix on the mechanical properties of squeeze cast Al-50 % SiCp composites
Mindivan, Harun
Kayali, E. Sabri
Cimenoglu, Huseyin
PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, 2007, 561-565 : 791 - +
[43] Thermal residual stresses and their effect on mechanical properties in SiCp reinforced Al matrix composites
Cansun, A
Aran, A
ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, 1996, 217 : 1115 - 1120
[44] Effect of Pressure on the Solidification Behavior and Mechanical Properties of SiCp/Al-Mg Composites
张宏伟
耿林
FAN Guohua
SUN Yuan
Journal of Wuhan University of Technology(Materials Science Edition), 2013, 28 (02) : 274 - 278
[45] Particle Distribution and Mechanical Properties of Nano-SiCP/Al-Cu Composites
Wu, Shusen
Li, Jianyu
An, Ping
Lu, Shulin
THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 2060 - 2065
[46] Selective laser melting of SiCp/Al composites: Densification, microstructure, and mechanical and tribological properties
Xie, Houbo
Zhang, Jialian
Li, Faliang
Yuan, Gaoqian
Zhu, Qing
Jia, Quanli
Zhang, Haijun
Zhang, Shaowei
CERAMICS INTERNATIONAL, 2021, 47 (21) : 30826 - 30837
[47] Microstructure and thermo-mechanical properties of SiCp/Al composites prepared by pressureless infiltration
Qingping Wang
Fanfei Min
Jinbo Zhu
Journal of Materials Science: Materials in Electronics, 2013, 24 : 1937 - 1940
[48] Effect of pressure on the solidification behavior and mechanical properties of SiCp/Al-Mg composites
Hongwei Zhang
Lin Geng
Guohua Fan
Yuan Sun
Journal of Wuhan University of Technology-Mater. Sci. Ed., 2013, 28 : 274 - 278
[49] Effect of pressure on the solidification behavior and mechanical properties of SiCp/Al-Mg composites
Zhang Hongwei
Geng Lin
Fan Guohua
Sun Yuan
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2013, 28 (02): : 274 - 278
[50] Microstructure and thermo-mechanical properties of SiCp/Al composites prepared by pressureless infiltration
Wang, Qingping
Min, Fanfei
Zhu, Jinbo
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2013, 24 (06) : 1937 - 1940

← 1 2 3 4 5 →