Synthesis of Al2O3/SiC composite materials from waste clay brick powder

被引:0
|
作者
Xu, Sheng [1 ]
Wang, Xitang [1 ]
Wang, Zhoufu [1 ]
Zhang, Baoguo [1 ]
机构
[1] Hubei Province Key Laboratory of Ceramics and Refractory, Wuhan University of Science and Technology, Wuhan 430081, China
关键词
Alumina - Anthracite - Brick - Carbothermal reduction - Raw materials - Refractory materials - Scanning electron microscopy - Silicon carbide - Synthesis (chemical) - Waste utilization;
D O I
暂无
中图分类号
学科分类号
摘要
Using waste clay refractories as raw materials and anthracite coal as a reducer, Al2O3/SiC composite materials were synthesized by carbon thermal reduction reaction. The synthesis process and its influencing factors were investigated. The results show that Al2O3/SiC composite materials can be synthesized from waste clay brick under the condition of proper C/SiO2 mole ratio over 1600°C. Increasing synthesis temperature and prolonging soaking time are beneficial to the reaction process and choosing raw materials with small grain size and adding suitable catalyst can also assist the reaction process. SEM results demonstrated that SiC phase distributed uniformly in the corundum phase in the Al2O3/SiC composite materials.
引用
收藏
页码:586 / 588
相关论文
共 50 条
  • [41] Sintering of Al2O3/SiCw ceramic composite materials
    Urretavizcaya, G
    Lopez, JMP
    Cavalieri, AL
    ANALES DE LA ASOCIACION QUIMICA ARGENTINA, 1995, 83 (06): : 383 - 387
  • [42] The overview of Al2O3/SiC nanocomposites I -: Materials preparation
    Yan, LT
    Si, WJ
    Tao, X
    Miao, HZ
    RARE METAL MATERIALS AND ENGINEERING, 2004, 33 (06) : 6 - 9
  • [43] Evolution of microstructure and mechanical properties in laser induced reaction coating of Al2O3 on SiC/Al2O3 composite
    Dahotre, NB
    Xiao, C
    Boss, W
    McCay, MH
    McCay, TD
    ELEVATED TEMPERATURE COATINGS: SCIENCE AND TECHNOLOGY II, 1996, : 441 - 452
  • [44] Study of age hardening process on Al/SiC/Al2O3 hybrid composite
    reddy, Kolli Balasivarama
    shaivinay, Chiguluri
    naidu, Jeevan T.
    Lekhaz, Shri
    Akula, Nived
    3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
  • [45] Preparation of Al2O3 and Y2O3-coated SiC composite particles
    Zhang, JX
    Yang, JY
    Gao, LQ
    Hou, YY
    Li, F
    JOURNAL OF INORGANIC MATERIALS, 1999, 14 (03) : 380 - 384
  • [46] Synthesis of an Al/Al2O3 composite by severe plastic deformation
    Kuncicka, Lenka
    Lowe, Terry C.
    Davis, Casey F.
    Kocich, Radim
    Pohludka, Martin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 646 : 234 - 241
  • [47] Synthesis and microstructure of nanostructured Al/Al2O3(H)-composite
    Veith, M
    Faber, S
    Hempelmann, R
    Janssen, S
    Prewo, J
    Eckerlebe, H
    JOURNAL OF MATERIALS SCIENCE, 1996, 31 (08) : 2009 - 2017
  • [48] Fabrication and characterisation of composite materials Al2O3-SiC
    Fonseca, V.
    Refugio y E. Rocha, E.
    REVISTA MEXICANA DE FISICA, 2005, 51 (02) : 98 - 101
  • [49] Synthesis of Al2O3/AIN composite powders by plasma processed Al2O3 with various additives
    Boey F.Y.C.
    Zhao X.L.
    Tok A.I.Y.
    Journal of Materials Research, 2004, 19 (05) : 1356 - 1363
  • [50] Al2O3/Al2O3 joints brazed with composite active filler materials obtained by mechanical alloying
    Fang, HY
    Yang, JG
    Hu, JF
    NEW FRONTIERS OF PROCESSING AND ENGINEERING IN ADVANCED MATERIALS, 2005, 502 : 473 - 478