Minimal quantity lubrication-MQL in grinding of Ti-6Al-4V titanium alloy

被引：0

作者：

Sadeghi, M.H. ^{[1
]}

Haddad, M.J. ^{[1
]}

Tawakoli, T. ^{[2
]}

Emami, M. ^{[1
]}

机构：

[1] CAD/CAM Laboratory, School of Engineering, Tarbiat Modares University, Tehran, Iran

[2] Institute of Grinding and Precision Technology (KSF), Furtwangen University, Schwenningen 78054VS, Germany

来源：

International Journal of Advanced Manufacturing Technology | 2009年 / 44卷 / 5-6期

关键词：

Titanium and its alloys are attractive materials due to their unique high strength-weight ratio that is maintained at elevated temperatures and their exceptional corrosion resistance. The major application of titanium has been in the aerospace industry. On the other hand; titanium and its alloys are notorious for their poor thermal properties and are classified as difficult-to-machine materials. The problems that arise during grinding of titanium alloys are attributed to the high specific energy and high grinding zone temperature. Significant progress has been made in dry and semidry machining recently; and minimal quantity lubrication (MQL) machining in particular has been accepted as a successful semidry application because of its environmentally friendly characteristics. A number of studies have shown that MQL machining can show satisfactory performance in practical machining operations. However; there has been few investigation of MQL grinding of special alloys like titanium alloys and the cutting fluids to be used in MQL grinding of these alloys. In this study; vegetable and synthetic esters oil are compared on the basis of the surface quality properties that would be suitable for MQL applications. The cutting performance of fluids is also evaluated using conventional wet (fluid) grinding of Ti-6Al-4V. As a result; synthetic ester oil is found to be optimal cutting fluids for MQL grinding of Ti-6Al-4V. © 2008 Springer-Verlag London Limited;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：487 / 500

共 50 条

[31] EXPERIMENTAL STUDY ON MICRO END-MILLING PROCESS OF Ti-6Al-4V USING NANOFLUID MINIMUM QUANTITY LUBRICATION (MQL)
Kim, Dae Hoon
Lee, Pil-Ho
Kim, Jung Sub
Moon, Hyungpil
Lee, Sang Won
PROCEEDINGS OF THE ASME 9TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2014, VOL 1, 2014,
[32] Investigation of cutting force and temperature of end-milling Ti-6Al-4V with different minimum quantity lubrication (MQL) parameters
Liu, Z. Q.
Cai, X. J.
Chen, M.
An, Q. L.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2011, 225 (B8) : 1273 - 1279
[33] Machining of Titanium Alloy Ti-6Al-4V for Biomedical Applications
Balazic, Matej
Kopac, Janez
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2010, 56 (03): : 202 - 206
[34] Machinability of titanium alloy (Ti-6Al-4V) by abrasive waterjets
Seo, YW
Ramulu, M
Kim, D
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2003, 217 (12) : 1709 - 1721
[35] Permanent Mold Casting of Titanium Alloy Ti-6Al-4V
M. Sadayappan
M. Sahoo
C. Lavender
P. Jablonski
International Journal of Metalcasting, 2008, 2 : 69 - 74
[36] Study on vacuum brazing of titanium alloy Ti-6Al-4V
Wu, Minfang
Jiang, Chengyu
Yu, Zhishui
Liang, Chao
2002, Editorial Office of Chinese Journal of Mechanical Engineering (38):
[37] Adiabatic smear bands in a Ti-6Al-4V titanium alloy
Liao, SC
Duffy, J
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1998, 46 (11) : 2201 - 2231
[38] Electrical discharge machining of titanium alloy (Ti-6Al-4V)
Hascalik, Ahmet
Caydas, Ula
APPLIED SURFACE SCIENCE, 2007, 253 (22) : 9007 - 9016
[39] Laser surface nitriding of Ti-6Al-4V titanium alloy
Masse, JE
Mathieu, JF
MATERIALS AND MANUFACTURING PROCESSES, 1996, 11 (02) : 207 - 214
[40] Characterization and modeling of twinning in a titanium alloy Ti-6Al-4V
Frederik, Coghe
Wim, Tirry
Luc, Rabet
Paul, Van Houtte
TEXTURES OF MATERIALS, PTS 1 AND 2, 2012, 702-703 : 237 - +

← 1 2 3 4 5 →