Waste Bauxite Residue Valorization as Trace Metal Sorbent: Application to Acid Mine Drainage Remediation

With an output of more than two million tons of alumina per year, Venezuela is an important producer. As observed, this mining extraction activity generates a large number of by-products poorly valorized for many reasons (economic, technical, and due to environmental standards and regulations) Venezuela production generates wastes (more than 15 million of m3) called red muds, which are dumped in old lagoons near the Orinoco river or stored. This sludge has a high alkalinity (pH between 10 and 13) and a chemical composition containing some heavy metals (40 ppm Cr, 107 ppm La, 178 ppm Ce) that means it is considered environmentally problematic waste. However, their mineralogical, textural and structural characteristics make them adsorption materials. So, the aim of the study presented here was to investigate the sorption properties of these residues in the case of treatment of water from acid mine drainage. In fact, with an important reactive surface, their capacities to trap by adsorption trace elements such as cadmium, lead or zinc has been studied. Batch sorption tests revealed significant retention of contaminants such as Pb, Zn and As. These retention processes were interpreted using the Langmuir isotherm model. The promising first results indicate that the red mud named Venezuelan bauxite residue (VBR) reveals its great potential as a sorbent of inorganic pollutants. The sorption process is chemically dependent and efficient for certain pH and IS ranges. In addition, the material showed a strong affinity for the adsorption of arsenate (As5+). This was observed during post adsorption chemical speciation experiments, through the very high affinity of this element for the least mobile fractions, including oxyhydroxides mobile fractions, including Fe oxyhydroxides (amorphous). Nevertheless, these mining by-products could be considered as valuable absorbent materials. Despite this promising results, further studies are required to evaluate their potential in different conditions (dynamic tests, pH, IS, inorganic and organic contaminants, concentration and time effect).