Research Progress on Micro-arc Oxidation Colored Film Preparation Technology

被引：0

作者：

Guo, Junhao ^{[1
]}

Zhang, Dezhong ^{[1
]}

Zhao, Tao ^{[1
]}

Chen, Wenxuan ^{[2
]}

Guo, Yong ^{[3
]}

机构：

[1] Wuhan Research Institute of Materials Protection Co., Ltd. CAM, Wuhan,430030, China

[2] Shanghai Youzhuo Chemical Technology Development Co., Ltd., Shanghai,201800, China

[3] Shenzhen Yuancheng Fine Chemical Development Co., Ltd., Shenzhen,518100, China

来源：

Surface Technology | 2024年 / 53卷 / 14期

关键词：

With the development of ultra-thin; ultra-light; and miniaturization of electronic products; more and more alloy materials such as aluminum; magnesium and titanium were used in 3C fuselage structural parts. Electronic products; especially the casings of laptop computers and mobile phones; not only require high surface hardness and good wear resistance; but also require gorgeous and exquisite appearance; for which reason micro-arc oxidation colored films have become a research hotspot. In this paper; coloring methods of micro-arc oxidation coatings were firstly summarized; including changing the composition of electrolyte as adding inert colorant or transition metal salt and changing the composition of alloy as doping transition metal elements; etc. Among which; adding transition metal salts to the electrolyte was the most used; for which reason; a variety of works preparing micro-arc oxidation coating in black; brown; blue; and other colors in this way were reviewed subsequently. In the research of black and brown micro-arc oxidation coatings; the transition metal salts were converted into their corresponding oxides and then melted and deposited on the alloy matrix during the MAO process. The color of coatings came from their corresponding transition metal oxides. In the research of blue micro-arc oxidation coatings; although method was the same as that mentioned above; with the addition of transition metal salts; the reason for the colored coatings was disparate. The first research reported the matrix Al2O3 formed a bluish solid solution with Ti3+ iron added that colored the coating blue; another research reported the matrix Al2O3 combined with Co2+ to form the cobalt blue that colored the coatings blue. In the research of green micro-arc oxidation coatings; although the addition of different substances (Cr2O3 and K2Cr2O7) containing the same transition metal element Cr as colorants; the green coatings were both prepared and illustrated that there were different ways to color the coatings even with the same element. In the research of yellow micro-oxidation coatings; a great novel method was born that adding Na2SnO3 containing the element Sn that was in the same main group as Si to the basic Na2SiO3 electrolyte; and the SnO32– reacted in the same way as SiO32– in the micro-oxidation process that formed the yellow SnO2 coloring the coatings. Na2SnO3 also colored the coatings yellow despite the Sn element was not the transition metal element. During the above-mentioned coloring introduce; parameters that might affect the coating color were also briefly discussed according to the published research; including temperature; electrolyte composition and electrical parameters; etc. This article focused on an overview of the micro-arc oxidation coloring principle; coloring methods and currently studied color types; while also summarized the shortcomings of the micro-arc oxidation coloring film layer such as low glossiness; dull color and poor decorative effect. In the future; the development direction of micro-arc oxidation coloring films is to conduct in-depth research on the micro-arc oxidation coloring mechanism; improve the micro-arc oxidation electrolysis system; and explore the influence of process parameters to improve the decorativeness of the colored film and expand the color types of the micro-arc oxidation film until it can meet the application needs of more scenes. © 2024 Chongqing Wujiu Periodicals Press. All rights reserved;

D O I：

10.16490/j.cnki.issn.1001-3660.2024.14.004

中图分类号：

学科分类号：

摘要：

引用

页码：45 / 55

共 50 条

[31] Strontium doped hydroxyapatite film formed by micro-arc oxidation
Nan, Kaihui
Wu, Tao
Chen, Jionghao
Jiang, Shan
Huang, Yong
Pei, Guoxian
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2009, 29 (05): : 1554 - 1558
[32] Preparation of Compact Micro-Arc Oxidation Coatings on Aluminum Alloys
Wu, P. N.
Xi, J. J.
Zhao, J.
Wang, T. J.
ADVANCES IN FUNCTIONAL MANUFACTURING TECHNOLOGIES, 2010, 33 : 492 - +
[33] Micro-arc oxidation of aluminum
Nieuzyla, Lukasz
Nawrat, Ginter
Michalska, Joanna
OCHRONA PRZED KOROZJA, 2011, 54 (4-5): : 243 - 245
[34] Application of micro-arc oxidation technology in thermal control coating
Li, Xiang
Yao, Zhong-Ping
Li, Xue-Jian
Xu, Hong
Xia, Qi-Xing
Chen, Chang-Ju
Jiang, Zhao-Hua
Surface Technology, 2019, 48 (07): : 24 - 36
[35] Preparation and Performance of Tantalum Micro-Arc Oxidation Battery Anode
Hao, Guodong
Tian, Xue
Xiyou Jinshu/Chinese Journal of Rare Metals, 2024, 48 (07): : 1050 - 1055
[36] Intelligent Technology of Oxide Layer Formation by Micro-Arc Oxidation
Pecherskaya, Ekaterina A.
Golubkov, Pavel E.
Artamonov, Dmitriy, V
Melnikov, Oleg A.
Karpanin, Oleg, V
Zinchenko, Timur O.
IEEE TRANSACTIONS ON PLASMA SCIENCE, 2021, 49 (09) : 2613 - 2617
[37] Micro-arc Oxidation Coating Containing Phosphorus on Tantalum Substrates Prepared by Micro-arc Oxidation
Liu, Da-chang
Ni, Jin-ping
Ye, Jun-Xing
Ni, Xiao-Hui
Zhu, Xing-Yuan
Zhang, Zhi-Yong
Liu, Ren-Bao
Zhao, Quan-Ming
JOURNAL OF TESTING AND EVALUATION, 2021, 49 (06) : 4662 - 4670
[38] The Research on Anticorrosion and Abrasion Behavior in Corrosive Medium of Micro-Arc Oxidation Film on Magnesium Alloy
Lou, Baiyang
Tang Yixiang
Li, Xiao
ADVANCED MATERIALS AND COMPUTER SCIENCE, PTS 1-3, 2011, 474-476 : 123 - 126
[39] Research status of magnesium alloys by micro-arc oxidation: a review
Dou, Jinhe
Chen, Yang
Yu, Huijun
Chen, Chuanzhong
SURFACE ENGINEERING, 2017, 33 (10) : 731 - 738
[40] Measurement System Research on Micro-arc Oxidation Load Feature
Liu, Hongyang
Yang, Wei
Han, Jiye
Yang, Shiyan
ENVIRONMENTAL TECHNOLOGY AND RESOURCE UTILIZATION II, 2014, 675-677 : 42 - 46

← 1 2 3 4 5 →