Broadband elastic energy harvesting based on achromatic meta-grating

Energy harvesting exploiting the inverse piezoelectric effect has been the subject of much attention and discussion in the field of elastic and structural dynamics. Recently, the ongoing development of elastic metamaterials and metasurfaces has opened up a new way to improve the quality of energy harvesting. Here, we proposed a new strategy for harvesting elastic energy in a plate, which is the use of the inverse piezoelectric effect to convert the elastic energy into electrical energy after the achromatic meta-grating has focused broadband flexural waves. A new theoretical method to design the achromatic meta-grating is proposed based on derived analytical expression of the phase shift of subunit. When a meta-grating, a thin plate and a piezoelectric patch are combined into an energy harvesting system, the elastic energy can be converted into electric energy by the system, and the output voltage can be amplified by twice that of the system without the meta-grating. A theoretical framework is built to analyze the performance of the energy harvesting system, and variational parametric analyses are carried out to obtain the optimal resistance, the optimal length, thickness and position of piezoelectric patch, which are 870 Omega, 18 mm, 0.2 mm and 30 mm, respectively. For the optimized system, the power harvested rate of the system is close to 4 in the frequency band of 6-8 kHz. Finally, the design of the system based on the wave focusing principle is extended, and energy harvesters are designed for different frequency bands, which can all work under different excitation conditions (a local and a base excitations). Our work opens up a new route for elastic energy harvesting and may have broad application prospects in the development of self-powered sensors.