Precision prediction and error propagation model of remanufacturing machine tool assembly process

被引：0
|
作者：
Wang Z. [1 ]
Jiang X. [1 ]
Liu W. [1 ]
Shi M. [1 ]
Yang S. [1 ]
Yang G. [1 ]
机构：
[1] School of Mechanical Engineering, Shenyang University of Technology, Shenyang
来源：
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS | 2021年 / 27卷 / 05期
基金：
中国国家自然科学基金;
关键词：
Assembly error; Error flow correction function; Error propagation model; Precision prediction; Remanufacturing machine tool;
D O I：
10.13196/j.cims.2021.05.006
中图分类号：
学科分类号：
摘要：
The remanufactured machine tool is assembled by reusing parts, remanufactured parts and new parts, and its assembly parts have more uncertainty and randomness. To ensure the consistency and reliability of remanufacturing machine assembly precision, a mathematical model of assembly process error transfer should be established to describe the error transmission and accumulation rules of remanufacturing machine assembly process quantitatively. The mathematical mapping relationship between the quality characteristics of the parts, the actual measurement results and the error sources of assembly process during the assembly process of remanufactured machine tool was proposed. An error flow model of the remanufacturing machine's assembly process based on state-space model was also proposed. The variation of part quality characteristics, feature measurement and adjustment deviation of the remanufacturing machine tool assembly process were quantitatively described. On this basis, the error flow correction function was proposed to realize the accuracy prediction, analysis and quality error correction of remanufacturing machine tool. By taking the assembly process of remanufacturing machine headstock as an example, the result showed that the assembly process error could be reduced by the proposed model and correction function effectively. © 2021, Editorial Department of CIMS. All right reserved.
引用
收藏
页码：1300 / 1308
页数：8
相关论文
共 20 条
  • [11] JIANG Xingyu, DAI Mingming, LI Li, Et al., Quality control method of used product remanufacturing process based on dynamic and non-normal EWMA control charts, Computer Integrated Manufacturing Systems, 24, 5, pp. 1171-1178, (2018)
  • [12] MA Hao, FAN Hongli, LU Jiping, Et al., Geometric error modeling and application in machining process, Equipment Manufacturing Technology, 1, pp. 32-36, (2016)
  • [13] ZHANG Yutong, YANG Shuai, QIN Shiqiao, Et al., A new bias error prediction model for high-precision transfer alignment, Sensors, 18, 10, (2018)
  • [14] ZHAO Jiali, LIANG Jiaohu, XUE Pan, Analysis and modeling of variation transmission in muti-stage manufacturing process, Journal of Lanzhou University of Technology, 37, 3, pp. 28-33, (2011)
  • [15] ZHAO Jiali, GUO Wei, NIU Zhanwen, Et al., Quality stability of multi-stations assembly process based on stream of variation, Chinese Journal of Mechanical Engineering, 42, 11, pp. 88-93, (2006)
  • [16] YU Dezhong, XU Xianghong, Dimensional error modeling analysis and simulation of sheet metal multistage assemblies, China Mechanical Engineering, 24, 17, pp. 2331-2336, (2013)
  • [17] YU Luyun, JIAO Li, WANG Xibin, Et al., Dimensional error modeling modeling and analysis for multi-stage manufacturing error of meso-scale parts based on size effect, Computer Integrated Manufacturing Systems, 21, 4, pp. 971-980, (2015)
  • [18] CHEN Genliang, WANG Hao, LIN Zhongqin, Generalized kinematic mapping of constrained plane motions and its application to the accuracy analysis of general planar parallel robots, Mechanism and Machine Theory, 50, 1, pp. 29-47, (2012)
  • [19] LI Jiehua, WEN Zejun, YANG Shuyi, Et al., Quality evaluation model of multi-station assembly processes based on variation propagation, Journal of Changsha University of Science & Technology: Natural Science, 6, 4, pp. 64-68, (2009)
  • [20] CAI Shangwen, WANG Huifen, LIU Tingyu, Assembly precision prediction and adjustment method based on error propagation model, Machine Building & Automation, 45, 6, pp. 6-10, (2016)
12