On the use of X-ray computed tomography for the improvement of metal laser powder bed fusion process monitoring

被引：0
|
作者：
Bonato, Nicolò [1 ]
Zanini, Filippo [1 ]
Carmignato, Simone [1 ]
机构：
[1] University of Padova, Stradella San Nicola 3, Vicenza, Italy
来源：
e-Journal of Nondestructive Testing | 2023年 / 28卷 / 03期
关键词：
3D printing - Additives - Computerized tomography - Geometry - Powder metals - Process control - Process monitoring;
D O I：
10.58286/27706
中图分类号：
学科分类号：
摘要：
引用
收藏
相关论文
共 50 条
  • [31] X-RAY COMPUTED TOMOGRAPHY
    HORN, E
    ELECTRONICS AND POWER, 1978, 24 (03): : 181 - 181
  • [32] The use of microfocus X-ray computed tomography in characterising the hydration of a clay pellet/powder mixture
    Van Geet, M
    Volckaert, G
    Roels, S
    APPLIED CLAY SCIENCE, 2005, 29 (02) : 73 - 87
  • [33] Monitoring macro voids in mortar by X-ray computed tomography
    Birgul, Recep
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2008, 596 (03): : 459 - 466
  • [34] X-Ray Computed Tomography to Measure Bed Density in Sand Transport
    Brunelle, Corinne
    Francus, Pierre
    Camenen, Benoit
    Amos, Carl L.
    Des Roches, Mathieu
    Perret, Emeline
    Kassem, Hachem
    Daigle, Louis-Frederic
    Despres, Philippe
    JOURNAL OF HYDRAULIC ENGINEERING, 2022, 148 (12)
  • [35] The use of X-ray computed tomography for design and process modeling of aerospace composites: A review
    Naresh, K.
    Khan, K. A.
    Umer, R.
    Cantwell, W. J.
    MATERIALS & DESIGN, 2020, 190
  • [36] Effect of laser power on roughness and porosity in laser powder bed fusion of stainless steel 316L alloys measured by X-ray tomography
    Forien, Jean-Baptiste
    DePond, Philip J.
    Guss, Gabe M.
    Jared, Bradley H.
    Madison, Jonathan D.
    Matthews, Manyalibo J.
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2020, 111 (01) : 47 - 54
  • [37] In Situ Process Monitoring for Laser-Powder Bed Fusion using Convolutional Neural Networks and Infrared Tomography
    Elwarfalli, Hamed
    Papazoglou, Dimitri
    Erdahl, Dathan
    Doll, Amy
    Speltz, Jared
    PROCEEDINGS OF THE 2019 IEEE NATIONAL AEROSPACE AND ELECTRONICS CONFERENCE (NAECON), 2019, : 323 - 327
  • [38] Revealing dynamic processes in laser powder bed fusion with in situ X-ray diffraction at PETRA III
    Krohmer, Erwin
    Schmeiser, Felix
    Wahlmann, Benjamin
    Rosigkeit, Jan
    Graf, Gloria
    Spoerk-Erdely, Petra
    Clemens, Helmut
    Staron, Peter
    Koerner, Carolin
    Reimers, Walter
    Uhlmann, Eckart
    REVIEW OF SCIENTIFIC INSTRUMENTS, 2022, 93 (06):
  • [39] Direct observation of crack formation mechanisms with operando Laser Powder Bed Fusion X-ray imaging
    Ghasemi-Tabasi, Hossein E.
    de Formanoir, Charlotte
    Van Petegem, Steven
    Jhabvala, Jamasp
    Hocine, Samy
    Boillat, Eric
    Sohrabi, Navid
    Marone, Federica
    Grolimund, Daniel
    Van Swygenhoven, Helena
    Loge, Roland E.
    ADDITIVE MANUFACTURING, 2022, 51
  • [40] Nondestructive monitoring the deterioration process of cement paste exposed to sodium by X-ray computed tomography
    Yang, Yonggan
    Zhang, Yunsheng
    She, Wei
    Wu, Zhitao
    Liu, Zhiyong
    Ding, Yajiu
    CONSTRUCTION AND BUILDING MATERIALS, 2018, 186 : 182 - 190
12345