Effect of dew point during annealing on phosphatability of ultra-high-strength steel

被引：0

作者：

Park, Joongchul ^{[1
,2
]}

Park, Jiwoo ^{[2
]}

Heo, Yoon-Uk ^{[3
]}

Lee, Joonho ^{[2
]}

机构：

[1] POSCO, Tech Res Lab, 100 Songdogwahak Ro, Incheon 21985, South Korea

[2] Korea Univ, Dept Mat Sci & Engn, 145 Anam Ro, Seoul 02841, South Korea

[3] Pohang Univ Sci & Technol, Grad Inst Ferrous & Energy Mat Technol, 77Cheongam Ro, Pohang 37673, South Korea

来源：

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | 2024年 / 33卷

基金：

新加坡国家研究基金会;

关键词：

Phosphatability; Ultra-high-strength steel; Dew point; Surface oxide; SELECTIVE OXIDATION; INTERNAL OXIDATION; SURFACE OXIDES; WETTABILITY; XPS; SI;

D O I：

10.1016/j.jmrt.2024.11.149

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study aims to investigate the impact of controlled surface oxides on the phosphatability of ultra-highstrength steel, particularly for automotive applications. Surface oxides were controlled by adjusting the dew point to -30 and + 10 degrees C during the annealing process, and the consequent alterations in phosphatability were examined. XPS and TEM were utilized to analyze the surface characteristics of the samples. At dew points of -30 degrees C, minimal phosphating reaction was observed, whereas a significant enhancement in phosphating performance was noted with an increase in dew point to 10 degrees C. This improvement was attributed to structural modification influenced by the chemical composition of surface oxides, particularly the reduction in Si content and relatively higher Mn content and the enhanced internal oxidation at a dew point of 10 degrees C. The present results provide a heat treatment approach as a viable method to enhance phosphatability in ultra-high-strength steel.

引用

页码：8564 / 8572

页数：9

共 50 条

[21] Stress evolution mechanism during laser welding of ultra-high-strength steel: considering the effects of temperature sensitivity, strain hardening and annealing
Xu, Jiajun
Wang, Lu
Wu, Ruolin
Huang, Yu
Rong, Youmin
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 19 : 1711 - 1723
[22] Effect of Polymers on Behavior of Ultra-High-Strength Concrete
Mayhoub, Ola A.
Abadel, Aref A.
Alharbi, Yousef R.
Nehdi, Moncef L.
de Azevedo, Afonso R. G.
Kohail, Mohamed
POLYMERS, 2022, 14 (13)
[23] A New Wear Calculation Method for Galvanized Ultra-High-Strength Steel during Hot Stamping
Peng, Yuchun
Chen, Wei
Zhou, Hongming
METALS, 2024, 14 (07)
[24] Ultra-high-strength hot-rolled steel withstands high stresses
不详
ADVANCED MATERIALS & PROCESSES, 2008, 166 (05): : 15 - 16
[25] Cutting method influence on the fatigue resistance of ultra-high-strength steel
K. Mäntyjärvi
A. Väisänen
J. A. Karjalainen
International Journal of Material Forming, 2009, 2
[26] Variant Pairing of Lath Bainite and Martensite in an Ultra-High-Strength Steel
Li, Meiying
Wang, Shun
Jia, Tao
Zhao, Xianming
METALS, 2022, 12 (11)
[27] Effect of Austenization Temperature on the Martensitic Transformation in a Low-alloy Ultra-high-strength Steel
Qiao, Zhixia
Zhang, Dantian
Liu, Yongchang
Yan, Zesheng
MECHANICAL, MATERIALS AND MANUFACTURING ENGINEERING, PTS 1-3, 2011, 66-68 : 1797 - +
[28] Effect of Alloying and Coiling Temperature on the Microstructure and Bending Performance of Ultra-High-Strength Strip Steel
Abhisek Mandal
Anish Karmakar
Debalay Chakrabarti
Claire Davis
Metallurgical and Materials Transactions A, 2018, 49 : 6359 - 6374
[29] CUTTING METHOD INFLUENCE ON THE FATIGUE RESISTANCE OF ULTRA-HIGH-STRENGTH STEEL
Mantyjarvi, K.
Vaisanen, A.
Karjalainen, J. A.
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 547 - 550
[30] Martensitic Transformation in a Low-alloy Ultra-high-strength Steel
Qiao, Zhixia
Zhang, Dantian
Liu, Yongchang
Yan, Zesheng
MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-3, 2011, 295-297 : 1470 - +

← 1 2 3 4 5 →