Sliding wear analysis in borided AISI 316L steels

被引：1
|
作者：
Fernández-Valdés, D. [1 ]
Meneses-Amador, A. [1 ]
López-Liévano, A. [2 ]
Ocampo-Ramírez, A. [2 ]
机构：
[1] Instituto Politécnico Nacional, Grupo Ingeniería de Superficies, SEPI-ESIME, U.P. Adolfo López Mateos, Zacatenco,Ciudad de México,07738, Mexico
[2] Instituto Sanmiguelense, Carretera San Miguel de Allende - Dr. Mora No. 10, San Miguel de Allende 37748, Guanajuato, Mexico
来源：
Materials Letters | 2021年 / 285卷
关键词：
Boriding - Wear of materials - Borides - Shear stress - Austenitic stainless steel - Failure (mechanical);
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study a numerical-experimental evaluation of the sliding wear resistance of iron boride layers formed on the surface of an AISI 316L steel was developed. The boriding process was carried out at a temperature of 900 °C for 2 h and 6 h of exposure. Pin-on-disc tests were realized on non-borided and borided AISI 316L steels. The experimental results showed that the boriding contributed significantly to the wear resistance of the AISI 316L steel compared to the non-borided material. In addition, the thinner boride layer thickness developed more severe wear mechanisms. Finally, principal stresses and maximum shear stress generated in the layer/substrate systems were evaluated during the wear test using the finite element method (FEM). © 2020
引用
收藏
相关论文
共 50 条
  • [21] Investigation of Liquid Metal Embrittlement of AISI 316L steels
    Stefanini, L.
    Lo Frano, Rosa
    Stergar, Erich
    PROCEEDINGS OF THE 24TH INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING, 2016, VOL 5, 2016,
  • [22] Development of tribological maps on borided AISI 316L stainless steel under ball-on-flat wet sliding conditions
    Garcia-Leon, R. A.
    Martinez-Trinidad, J.
    Campos-Silva, I
    Figueroa-Lopez, U.
    Guevara-Morales, A.
    TRIBOLOGY INTERNATIONAL, 2021, 163
  • [23] Sliding Wear Resistance of Borided AISI 4140 Steel
    Marquez-Cortes, R.
    Martinez-Trinidad, J.
    Flores-Martinez, M.
    Flores-Jimenez, M.
    Garcia-Leon, R. A.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (20) : 9101 - 9113
  • [24] Tribochemical products on borided AISI 316L steel exposed to Hank's solution
    Garcia-Leon, R. A.
    Martinez-Trinidad, J.
    Palomar-Pardave, M.
    Lartundo-Rojas, L.
    Guevara-Morales, A.
    Martinez-Gutierrez, H.
    WEAR, 2024, 538
  • [25] Influence of Heat Input on the Characteristics and Properties of AISI 316 and AISI 316L Steels Weld Beads
    Silva, Rafaela dos Santos
    Demarque, Rudineli
    dos Santos, Ellem Patricia
    de Castro, Jose Adilson
    SOLDAGEM & INSPECAO, 2020, 25
  • [26] Influence of heat input on the characteristics and properties of aisi 316 and aisi 316l steels weld beads
    Silva R.S.
    Demarque R.
    Dos Santos E.
    de Castro J.A.
    Soldagem e Inspecao, 2020, 25
  • [27] Corrosion behavior of AISI 316 L borided and non-borided steels immersed in a simulated body fluid solution
    Mejia-Caballero, I.
    Palomar-Pardave, M.
    Martinez Trinidad, J.
    Romero-Romo, M.
    Perez Pasten-Borja, R.
    Lartundo-Rojas, L.
    Lopez-Garcia, C.
    Campos-Silva, I.
    SURFACE & COATINGS TECHNOLOGY, 2015, 280 : 384 - 395
  • [28] Statistical significance of the sliding wear test parameters under lubricated conditions on borided AISI 316 L-SS samples
    Garcia-Leon, R. A.
    Martinez-Trinidad, J.
    Zepeda-Bautista, R.
    Garcia-Navarro, S.
    Moreno-Pacheco, L.
    TRIBOLOGY INTERNATIONAL, 2024, 192
  • [29] Residual stress analysis in orthogonal machining of standard and resulfurized AISI 316L steels
    M'Saoubi, R
    Outeiro, JC
    Changeux, B
    Lebrun, JL
    Dias, AM
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1999, 96 (1-3) : 225 - 233
  • [30] A STUDY ON CREVICE CORROSION OF AISI 316L, AISI 304L AND AISI 444 STAINLESS STEELS
    Bellezze, T.
    Quaranta, A.
    Roventi, G.
    Fratesi, R.
    METALLURGIA ITALIANA, 2008, (01): : 7 - 11
12345