Sliding wear analysis in borided AISI 316L steels

被引：1
|
作者：
Fernández-Valdés, D. [1 ]
Meneses-Amador, A. [1 ]
López-Liévano, A. [2 ]
Ocampo-Ramírez, A. [2 ]
机构：
[1] Instituto Politécnico Nacional, Grupo Ingeniería de Superficies, SEPI-ESIME, U.P. Adolfo López Mateos, Zacatenco,Ciudad de México,07738, Mexico
[2] Instituto Sanmiguelense, Carretera San Miguel de Allende - Dr. Mora No. 10, San Miguel de Allende 37748, Guanajuato, Mexico
来源：
Materials Letters | 2021年 / 285卷
关键词：
Boriding - Wear of materials - Borides - Shear stress - Austenitic stainless steel - Failure (mechanical);
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In this study a numerical-experimental evaluation of the sliding wear resistance of iron boride layers formed on the surface of an AISI 316L steel was developed. The boriding process was carried out at a temperature of 900 °C for 2 h and 6 h of exposure. Pin-on-disc tests were realized on non-borided and borided AISI 316L steels. The experimental results showed that the boriding contributed significantly to the wear resistance of the AISI 316L steel compared to the non-borided material. In addition, the thinner boride layer thickness developed more severe wear mechanisms. Finally, principal stresses and maximum shear stress generated in the layer/substrate systems were evaluated during the wear test using the finite element method (FEM). © 2020
引用
收藏
相关论文
共 50 条
  • [1] Sliding wear analysis in borided AISI 316L steels
    Fernandez-Valdes, D.
    Meneses-Amador, A.
    Lopez-Lievano, A.
    Ocampo-Ramirez, A.
    MATERIALS LETTERS, 2021, 285
  • [2] Finite element analysis of sliding wear on the borided AISI 316L stainless steel
    Martinez-Londono, J. C.
    Martinez-Trinidad, J.
    Garcia-Leon, R. A.
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024,
  • [3] Wear maps of borided AISI 316L steel under ball-on-flat dry sliding conditions
    Garcia-Leon, R. A.
    Martinez-Trinidad, J.
    Campos-Silva, I
    Figueroa-Lopez, U.
    Guevara-Morales, A.
    MATERIALS LETTERS, 2021, 282
  • [4] Wear maps of borided AISI 316L steel under ball-on-flat dry sliding conditions
    García-León, R.A.
    Martínez-Trinidad, J.
    Campos-Silva, I.
    Figueroa-López, U.
    Guevara-Morales, A.
    Materials Letters, 2021, 282
  • [5] Analysis of sliding wear tests of plasma processed AISI 316L steel
    Duarte, Michelle C. S.
    Godoy, Cristina
    Wilson, J. C. Avelar-Batista
    SURFACE & COATINGS TECHNOLOGY, 2014, 260 : 316 - 325
  • [6] Dry sliding wear test on borided AISI 316L stainless steel under ball-on-flat configuration: A statistical analysis
    Garcia-Leon, R. A.
    Martinez-Trinidad, J.
    Zepeda-Bautista, R.
    Campos-Silva, I
    Guevara-Morales, A.
    Martinez-Londono, J.
    Barbosa-Saldana, J.
    TRIBOLOGY INTERNATIONAL, 2021, 157
  • [7] Characterization of borided AISI 316L stainless steel implant
    Özbek, I
    Konduk, BA
    Bindal, C
    Ucisik, AH
    VACUUM, 2002, 65 (3-4) : 521 - 525
  • [8] A numerical-experimental study of AISI 316L borided steels under cyclic contact loading
    Fernandez-Valdes, D.
    Vasquez-De la Rosa, O.
    Rodriguez-Castro, G. A.
    Meneses-Amador, A.
    Lopez-Lievano, A.
    Ocampo-Ramirez, A.
    SURFACE & COATINGS TECHNOLOGY, 2021, 423
  • [9] Micro-Abrasion Wear Resistance of Borided 316L Stainless Steel and AISI 1018 Steel
    C. D. Reséndiz-Calderon
    G. A. Rodríguez-Castro
    A. Meneses-Amador
    I. E. Campos-Silva
    J. Andraca-Adame
    M. E. Palomar-Pardavé
    E. A. Gallardo-Hernández
    Journal of Materials Engineering and Performance, 2017, 26 : 5599 - 5609
  • [10] Micro-Abrasion Wear Resistance of Borided 316L Stainless Steel and AISI 1018 Steel
    Resendiz-Calderon, C. D.
    Rodriguez-Castro, G. A.
    Meneses-Amador, A.
    Campos-Silva, I. E.
    Andraca-Adame, J.
    Palomar-Pardave, M. E.
    Gallardo-Hernandez, E. A.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (11) : 5599 - 5609
12345