Flexure Behavior of Corroded Reinforced Concrete Beam

被引：0
|
作者：
Liu, Changjun [1 ]
Li, Yage [1 ]
Shui, Yi [1 ]
Yuan, Longwen [1 ]
Li, Xinyan [1 ]
Zhao, Kaiji [2 ]
机构：
[1] CCCC Second Harbor Engineering Construction Technology Company Co., Ltd, Hubei, Wuhan,430021, China
[2] College of Engineering, Texas A&M University, TX,77843, United States
来源：
Journal of Engineering Science and Technology Review | 2024年 / 17卷 / 03期
关键词：
The steel reinforcement within concrete beams is vulnerable to corrosion.In order to explore the flexural load-carrying capacity of beams under varying corrosion rates; a theoretical calculation and prediction model was proposed in this study. The study involved accelerated corrosion testing of three beams; with an additional beam serving as a control. A four-point bending test was conducted on all beams in accordance with predetermined corrosion rates. Strain gauges were positioned at the midspan to monitor strain data; and dial gauges were employed to measure deflection deformation at vulnerable sections. Experimental investigation was employed to ascertain the parameters that influence the deformation of a beam due to corrosion rate variations during loading; and the predictive model for the bending bearing capacity in relation to corrosion level was established. Results demonstrate the correlation between the elevated corrosion rate and the gradual increase in the average and maximal crack widths on the beam surfaces. The increase rate of maximal crack width exceeds the average; although both display a similar linear growth trend. The impact of corrosion on the initiation of crack and propagation in the test beams increase with high corrosion levels. Conversely; the effect of corrosion is limited when the corrosion rate remained below 15%. Nevertheless; once the corrosion rate exceeds 25%; a more pronounced effect becomes evident. Furthermore; the corrosion of steel reinforcement has a considerable effect on the yield and ultimate load-carrying capacity of the test beams. Upon reaching a corrosion rate of 25%; the flexural capacity of the corroded beams is found to be 54% of the uncorroded beams. This result indicates that as corrosion increases; the flexural capacity decreases linearly. This study offers a reference for accelerating the corrosion testing of reinforced concrete beams and predicting the bending bearing capacity of the corresponding corrosion level. © 2024 School of Science; DUTH. All rights reserved;
D O I：
10.25103/jestr.173.08
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：60 / 70
相关论文
共 50 条
  • [31] Fatigue behavior of corroded reinforced concrete beams-a review
    Li, Shibin
    Tang, Hongwei
    Wang, Xin
    ADVANCES IN STRUCTURAL ENGINEERING, PTS 1-3, 2011, 94-96 : 1523 - +
  • [32] BEARING BEHAVIOR ANALYSIS OF CORRODED REINFORCED CONCRETE ROOF BOARDING
    Feng, Yu-Qin
    An, Shu-Hua
    Zhang, Lu
    PROCEEDINGS OF THE ELEVENTH INTERNATIONAL SYMPOSIUM ON STRUCTURAL ENGINEERING, VOL I AND II, 2010, : 465 - 468
  • [33] Study on modified axial-shear-flexure interaction model for corroded reinforced concrete columns
    Xing G.-H.
    Yang C.-Y.
    Chang Z.-Q.
    Qin Y.-J.
    Zhang G.-T.
    Gongcheng Lixue/Engineering Mechanics, 2019, 36 (08): : 87 - 95
  • [34] Fatigue Behavior of Reinforced Concrete Beams with Corroded Steel Reinforcement
    Yi, Wei-Jian
    Kunnath, Sashi K.
    Sun, Xiao-Dong
    Shi, Cai-Jun
    Tang, Fu-Jian
    ACI STRUCTURAL JOURNAL, 2010, 107 (05) : 526 - 533
  • [35] Bearing capacity model for corroded reinforced concrete members with large-eccentric flexure and compression
    Zhou, Xiwu
    Wei, Jun
    Dong, Rongzhen
    Yu, Jing
    Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2007, 35 (03): : 107 - 109
  • [36] Analytical model of flexural behavior of corroded reinforced concrete beams
    Xing, Guohua
    Niu, Ditao
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2014, 45 (01): : 193 - 201
  • [37] Modified axial-shear-flexure interaction approaches for uncorroded and corroded reinforced concrete beams
    Ou, Yu-Chen
    Nguyen Dang Nguyen
    ENGINEERING STRUCTURES, 2016, 128 : 44 - 54
  • [38] Bending characteristics of corroded reinforced concrete beam under repeated loading
    Fang, Congqi
    Yang, Shuai
    Zhang, Zhang
    STRUCTURAL ENGINEERING AND MECHANICS, 2013, 47 (06) : 773 - 790
  • [39] Reliability analysis of corroded reinforced concrete beam with regards to anchorage failure
    Blomfors, M.
    Honfi, D.
    Ivanov, O. Larsson
    Zandi, K.
    Lundgren, K.
    LIFE-CYCLE ANALYSIS AND ASSESSMENT IN CIVIL ENGINEERING: TOWARDS AN INTEGRATED VISION, 2019, : 337 - 344
  • [40] Monitoring fracture of steel corroded reinforced concrete members under flexure by acoustic emission technique
    Zaki, Ahmad
    Chai, Hwa Kian
    Behnia, Arash
    Aggelis, Dimitrios G.
    Tan, Jun Ying
    Ibrahim, Zainah
    CONSTRUCTION AND BUILDING MATERIALS, 2017, 136 : 609 - 618
12345