Effect of ultra-low temperature on flexural behavior of ultra-high toughness cementitious composites

被引：0
|
作者：
Su J. [1 ,2 ]
Qian W. [1 ]
机构：
[1] School of Civil Engineering and Environment, Hubei University of Technology, Wuhan
[2] Hubei University of Technology Engineering and Technology College, Hubei University of Technology, Wuhan
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2022年 / 39卷 / 06期
关键词：
Bending strength; Fiber content; Toughness; Ultra-high toughness cementitious composites; Ultra-low temperature;
D O I：
10.13801/j.cnki.fhclxb.20210823.001
中图分类号：
学科分类号：
摘要：
As a new type of composite material with good mechanical properties and durability, the flexural toughness of ultra-high toughness cementitious composites (UHTCC) is an important indicator to evaluate its mechanical properties. To explore the bending performance of UHTCC materials under an ultra-low temperature environment, five groups of UHTCC materials with different fiber contents were designed. After cryogenic treatment, four-point bending tests were carried out, and the equivalent strength was analyzed. A toughness evaluation method suitable for ultra-low temperature was proposed, which provided the theoretical basis and technical support for the wide application of UHTCC in the field of ultra-low temperature. The results show that the flexural strength of UHTCC increases significantly after ultra-low temperatures. When the temperature decreases to −160℃, the flexural strength of UHTCC increases by 67.67%, but it shows obvious brittleness. In an ultra-low temperature environment, the strength and toughness of UHTCC with 1.5vol% volume fraction are the best, but the performance of UHTCC is slightly reduced after exceeding the optimal volume fraction. Copyright ©2022 Acta Materiae Compositae Sinica. All rights reserved.
引用
收藏
页码：2844 / 2854
页数：10
相关论文
共 22 条
  • [11] XIE J, LI X M, WU H H., Experimental study on the axial-compression performance of concrete at cryogenic tem-peratures, Construction and Building Materials, 72, pp. 380-388, (2014)
  • [12] DANILLE D, HOULT N A, GREEN M F., Effects of varying temperature on the performance of reinforced concrete, Springer Netherlands, 48, 4, pp. 1109-1123, (2015)
  • [13] YAN J B, XIE J., Behaviours of reinforced concrete beams under low temperatures, Construction and Building Materials, 141, pp. 410-425, (2017)
  • [14] TOGNON G., Behavior of mortars and concretes in the temperature range from 20℃ to −196℃, 5th International Congress on the Chemistry of Cement, pp. 229-249, (1969)
  • [15] Fiber reinforced concrete test method standard: CECS 13-2010, (2010)
  • [16] Concrete structure test method standard: GB/T 50152-2012, (2012)
  • [17] LEE G C, SHIH T S, CHANG K C., Mechanical properties of concrete at low temperature, Journal of Cold Regions Engineering, 2, 1, pp. 13-24, (1988)
  • [18] YAMANA S, KASAMI H, OKUNO T., Properties of concrete at very low temperatures, ACI Special Publication, 55, pp. 1-12, (1978)
  • [19] CAI X P, YANG W C, YUAN J, Et al., Mechanics properties of concrete at low temperature, Advanced Materials Research, 1278, pp. 389-393, (2011)
  • [20] SHI Z C, SU Q T, SHAO C Y, Et al., The basic mechanical properties and flexural toughness evaluation method of coarse aggregate UHPC, Journal of Civil Engineering, 53, 12, pp. 86-97, (2020)
123