Effects of bonding temperature on mechanical properties and interfacial morphology of YG8/40Cr joints fabricated using SPS diffusion bonding

被引：0
|
作者：
Yang, Xiaolong [1 ]
Pan, Yafei [1 ,2 ,3 ]
Fan, Zhenyao [1 ]
Xie, Siyao [1 ]
Zhang, Jiuxing [1 ]
Du, Yong [4 ]
Luo, Fenghua [4 ]
Huang, Lei [5 ]
机构：
[1] School of Materials Science and Engineering, Hefei University of Technology, Anhui, Hefei,230009, China
[2] Monte-Bianco Diamond Applications Co., Ltd., Guangdong, Foshan,528313, China
[3] Engineering Research Center of High-Performance Copper Alloy Materials and Processing, Ministry of Education, Hefei University of Technology, Anhui, Hefei,230009, China
[4] State Key Laboratory of Powder Metallurgy, Central South University, Hunan, Changsha,410083, China
[5] School of Mechanical Engineering, Hefei University of Technology, Hefei,230009, China
来源：
International Journal of Refractory Metals and Hard Materials | 2024年 / 119卷
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Diffusion
引用
收藏
相关论文
共 50 条
  • [41] Interfacial microstructure, element diffusion, mechanical properties and metallurgical bonding mechanism of 316L-AlSi10Mg multi-material parts fabricated by laser powder bed fusion
    Miao, Huan
    Yusof, Farazila
    Ab Karim, Mohd Sayuti
    Wu, Bo
    Raja, Sufian
    Ibrahim, M. Z.
    Aziz, Izhar
    Chen, Daolun
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 8351 - 8365
  • [42] Effect of Bonding Temperature on Interfacial Reaction and Mechanical Properties of Diffusion-Bonded Joint Between Ti-6Al-4V and 304 Stainless Steel Using Nickel as an Intermediate Material
    Gopinath Thirunavukarasu
    Sukumar Kundu
    Brajendra Mishra
    Subrata Chatterjee
    Metallurgical and Materials Transactions A, 2014, 45 : 2067 - 2077
  • [43] Investigation on Effect of Temperature on Mechanical Properties and Microstructure of Dissimilar Ti-5Al-2.5Sn and AA2219 Alloy Joints through Diffusion Bonding Process
    Tejaswini, G. C.
    Lathashankar, B.
    Suresh, R.
    Venkatesan, Gowtham
    Kumar, N. G. Siddesh
    JORDAN JOURNAL OF MECHANICAL AND INDUSTRIAL ENGINEERING, 2024, 18 (04): : 891 - 899
  • [44] Microstructure and mechanical properties of Ti-48Al-2Cr-2Nb alloy joints produced by transient liquid phase bonding using spark plasma sintering
    Liang, J. M.
    Cao, L.
    Xie, Y. H.
    Zhou, Y.
    Luo, Y. F.
    Mudi, K. Q.
    Gao, H. Y.
    Wang, J.
    MATERIALS CHARACTERIZATION, 2019, 147 : 116 - 126
  • [45] Microstructure and mechanical properties of the vacuum diffusion bonding joints of 4J29 kovar alloy and 316L stainless steel using pure cobalt interlayer
    Fang, Y. J.
    Jiang, X. S.
    Mo, D. F.
    Song, T. F.
    Luo, Z. P.
    VACUUM, 2019, 168
  • [46] Effects of the rolling temperature on microstructure and mechanical properties of 2Cr13/316L laminated composites prepared by accumulative roll-bonding (ARB)
    Cao, R.
    Zhao, X. K.
    Ding, Y.
    Zhang, X. B.
    Jiang, X. X.
    Yan, Y. J.
    Chen, J. H.
    MATERIALS CHARACTERIZATION, 2018, 139 : 153 - 164
  • [47] Brazing Temperature Effects on the Microstructure and Mechanical Properties of Ti-45Al-8Nb Joints Using TiZrCuNi Amorphous Interlayer
    Wang, Sheng
    Xu, Tianle
    Wu, Yingchen
    Chen, Xiguo
    Yang, Xiaohong
    COATINGS, 2024, 14 (03)
  • [48] Effects of temperature and strain rate on microstructure and mechanical properties of high chromium cast iron/low carbon steel bimetal prepared by hot diffusion-compression bonding
    Gao, Xingjian
    Jiang, Zhengyi
    Wei, Dongbin
    Jiao, Sihai
    Chen, Dengfu
    Xu, Jianzhong
    Zhang, Xiaoming
    Gong, Dianyao
    MATERIALS & DESIGN, 2014, 63 : 650 - 657
  • [49] Microstructure and mechanical properties of C/C composite Ti3Al alloy joints prepared by transient liquid phase diffusion bonding using AgCuNiLi alloy as joining material
    Feng Yang
    Wang Jie
    Wang Chao
    Yang Haotian
    Liu Qiaomu
    Dong Lijin
    Zheng Huaibei
    VACUUM, 2020, 181
  • [50] Effects of Rolling Temperature on the Microstructure and Properties of 2Cr13/316L/9Cr18MoV Stainless Steel Composite Plate Fabricated by Hot-Rolling Bonding Process
    Penglin Zhang
    Xiaokang Zhao
    Bo Yang
    Xiaobo Zhang
    Rui Cao
    Journal of Materials Engineering and Performance, 2018, 27 : 3978 - 3993
12345