Study on mechanical properties and damage constitutive model of frozen sandstone under unloading condition

被引:0
|
作者
Dong X. [1 ,2 ]
Liu S. [1 ]
Liu P. [1 ]
机构
[1] College of Architecture and Civil Engineering, Xi'an University of Science and Technology, Shaanxi, Xi'an
[2] Key Laboratory of Western Mine Exploitation and Hazard Prevention, Xi'an University of Science and Technology, Shaanxi, Xi'an
基金
中国国家自然科学基金;
关键词
constitutive model; frozen sandstone; initial confining pressure; lateral unloading; mechanical properties; rock mechanics; unloading rate;
D O I
10.13722/j.cnki.jrme.2023.0862
中图分类号
学科分类号
摘要
In order to research the mechanical properties and damage characteristics of low-temperature soft rock under unloading, triaxial loading and unloading tests of frozen sandstone(temperature -5 ℃, -10 ℃ and -15 ℃) at different initial confining pressures and unloading rates were carried out by using GCTS low-temperature rock triaxial machine, which was compared with conventional loading tests. By obtaining the stress-strain curve during the whole experimental process, the mechanical properties and deformation characteristics of unloaded frozen sandstone were analyzed. The failure characteristics of sandstone were studied. The results show that:(1) The failure mode of unloaded frozen sandstone is a combination of shear failure and splitting failure, and the main failure mode is splitting failure. At high initial confining pressure and high unloading rate, the brittle characteristics of the rock sample are obvious, and the failure is more severe. (2) The peak strength of unloaded sandstone is generally lower(about 1/4 times) than that of conventional sandstone, but the residual strength is exactly the opposite, and both strength values are linearly positive correlated with the initial confining pressure. The elastic modulus of unloaded sandstone is about 1.5 times that of conventional sandstone, while the Poisson's ratio is 2-4 times. (3) The deformation and dilatation of frozen sandstone are obviously increased by unloading. The pre-peak stress strengthening effect and post-peak stress weakening effect of stress-strain curve are weakened, and the post-peak stress appears horizontal section. (4) Unloading affects the mechanical strength of frozen sandstone mainly by reducing cohesion and increasing internal friction angle. With the increase of unloading rate and the decrease of temperature, the peak strength and elastic modulus of frozen sandstone increase, while the deformation, Poisson's ratio and residual strength decrease. Based on the equal strain hypothesis of damage mechanics and Weibull distribution, the unloading damage constitutive model suitable for frozen sandstone is established, which can effectively reflect the lateral unloading mechanical characteristics. The research results can provide important reference for the study of mechanical properties of low temperature soft rock and its engineering application. © 2024 Academia Sinica. All rights reserved.
引用
收藏
页码:495 / 509
页数:14
相关论文
共 44 条
  • [21] TIAN Liyong, ZHU Zhende, ZHU Shu, Et al., Deformation and failure characteristics of siltstone under unloading condition, Journal of Yangtze River Scientific Research Institute, 30, 4, pp. 44-47, (2013)
  • [22] WANG Zaiquan, ZHANG Liming, SUN Hui, Et al., Experimental study of mechanical properties of limestone under different unloading velocities, Rock and Soil Mechanics, 32, 4, pp. 1045-1050, (2011)
  • [23] LIU Xinrong, LIU Jun, LI Dongliang, Et al., Experimental research on the effect of different initial unloading levels on mechanical properties of deep-buried sandstone, Rock and Soil Mechanics, 38, 11, pp. 3081-3088, (2017)
  • [24] XU Wensong, ZHAO Guangming, MENG Xiangrui, Et al., Experiment of griotte loading and unloading under true triaxial stress and single side unloading conditions, Journal of Southwest Jiaotong University, 54, 3, pp. 526-534, (2019)
  • [25] ZHANG D M, YANG Y S, CHU Y P, Et al., Influence of loading and unloading velocity of confining pressure on strength and permeability characteristics of crystalline sandstone[J], Results in Physics, 9, 3, pp. 1363-1370, (2018)
  • [26] QIU Shili, FENG Xiating, ZHANG Chuanqing, Et al., Experimental research on mechanical properties of deep-buried marble under different unloading rates of confining pressures, Chinese Journal of Rock Mechanics and Engineering, 29, 9, pp. 1807-1817, (2010)
  • [27] LI Xibing, CHEN Zhenghong, CAO Wenzhuo, Et al., Time-effect properties and mechanisms of marble failure under different unloading rates, Chinese Journal of Geotechnical Engineering, 39, 9, pp. 1565-1574, (2017)
  • [28] HUANG D, LI Y R., Conversion of strain energy in Triaxial Unloading Tests on Marble[J], International Journal of Rock Mechanics and Mining Sciences, 66, 3, pp. 160-168, (2014)
  • [29] HUANG X, LIU Q S, LIU B, Et al., Experimental study on the dilatancy and fracturing behavior of soft rock under unloading conditions[J], International Journal of Civil Engineering, 15, 7, pp. 921-948, (2017)
  • [30] LIU Jie, LI Jianlin, HUANG Yisheng, Et al., Study on unloaded rock mass constitution, Earth and Environment, 33, 3, pp. 112-116, (2005)