Method development and optimization for dispersive liquid-liquid microextraction factors using the response surface methodology with desirability function for the ultra-high performance liquid chromatography quadrupole time of flight mass spectrometry determination of organic contaminants in water samples: risk and greenness assessment

A simple, cost effective, and efficient dispersive liquid-liquid microextraction method was developed and optimized for the determination of organic contaminants in different environmental water matrices followed by UHPLC-QTOF-MS analysis. In the preliminary experiments, the univariate optimization approach was used to select tetrachloroethylene and acetonitrile as extraction and disperser solvents, respectively. The significant factors influencing DLLME were screened using full factorial design, and the optimal values for each variable were then derived through further optimization using central composite design with desirability function. The optimal conditions were achieved with 195 mu L of tetrachloroethylene as the extraction solvent, 1439 mu L of acetonitrile as the disperser solvent, and a sample pH of 5.8. Under these conditions, the method provided detection limits ranging from 0.11-0.48 mu g L-1 and recoveries ranging from 23.32-145.43% across all samples. The enrichment factors obtained ranged from 11.66-72.72. The proposed method was then successfully applied in real water samples. Only benzophenone was detected in the concentration range of 0.79-0.88 mu g L-1 across all the water samples. The calculated risk quotient resulting from benzophenone exposure in water samples showed a low potential risk to human health and the aquatic ecosystem. The method was also evaluated for its environmental friendliness using various metrics tools such as Analytical Eco-Scale (AES), Green Analytical Procedure Index (GAPI), Analytical GREEnness (AGREE), Analytical Greenness for Sample Preparation (AGREEprep), and Sample Preparation Metric of Sustainability (SPMS). Only AES qualified the method as green while it was considered acceptable and sustainable when assessed using SPMS. A simple, cost effective, and efficient dispersive liquid-liquid microextraction method was developed and optimized for the determination of organic contaminants in different environmental water matrices followed by UHPLC-QTOF-MS analysis.