CORROSION BEHAVIOR OF AUSTENITIC STEELS IN SUPERCRITICAL CO2 POWER GENERATION SYSTEM

被引：0

作者：

Deng, Zhongyue ^{[1
]}

Yang, Pu ^{[1
]}

Wang, Yueshe ^{[1
]}

Wang, Bowei ^{[1
]}

Zou, Lin ^{[1
]}

机构：

[1] State Key Laboratory of Multiphase Flow in Power Engineering, Xi’an Jiaotong University, Xi’an,710049, China

来源：

Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2024年 / 45卷 / 10期

关键词：

316L - Austenitic - Corrosion behaviour - Corrosion mechanisms - Power generation systems - Solar thermal power generation - Steel samples - Supercritical carbondioxides - Supercritical CO 2 - Working medium;

D O I：

10.19912/j.0254-0096.tynxb.2023-0954

中图分类号：

学科分类号：

摘要：

The power generation system with supercritical carbon dioxide（SCO2）as the working medium is a prospect technology in the field of concentration solar power. To investigate the corrosion behavior of typical materials in supercritical carbon dioxide power generation system，the corrosion experiment of austenitic steel samples of 316L and 321 exposed in SCO2 atmosphere at the temperature of 550 ℃ and the pressure of 25 MPa for 2000 h was conducted. The experimental results show that oxidation corrosion occurred in austenitic steel samples and 321 exhibits better corrosion resistance than 316L. The corrosion kinetics approximately follows a parabolic law. Both 321 and 316L forms a double oxide layer with chrome-rich scale and manganese chrome-spinel on the inside and iron-rich oxide nodules on the outside. In addition，carbon is mainly deposited on the surface of corrosion products while no carburizing phenomenon is found inside the material. Meanwhile，the corrosion mechanism model of austenitic steels is fabricated. © 2024 Science Press. All rights reserved.

引用

页码：400 / 406

共 50 条

[41] The Corrosion and Protection of Supercritical CO2 Transportation Pipelines
Chen, Bing
Ruan, Yinghao
2015 4TH INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENTAL PROTECTION (ICEEP 2015), 2015, : 4527 - 4531
[42] Analysis of internal corrosion of supercritical CO2 pipeline
Tang, Sen
Zhu, Chengyuan
Cui, Gan
Xing, Xiao
Mu, Jie
Li, Zili
CORROSION REVIEWS, 2021, 39 (03) : 219 - 241
[43] Integration of chemical looping combustion and supercritical CO2 cycle for combined heat and power generation with CO2 capture
Chen, Shiyi
Soomro, Ahsanullah
Yu, Ran
Hu, Jun
Sun, Zhao
Xiang, Wenguo
ENERGY CONVERSION AND MANAGEMENT, 2018, 167 : 113 - 124
[44] Corrosion Behavior of Austenitic Stainless Steels in CO2-Saturated Synthetic Oil Field Formation Water
Cardoso, Jorge Luiz
Moldel, Marcel
Krueger, Lutz
Gaspar Herculano, Luis Flavio
Neto, Pedro de Lima
Gomes da Silva, Marcelo Jose
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22 (04):
[45] Graph theory-based heat current analysis method for supercritical CO2 power generation system
Li, Xia
Chen, Qun
Chen, Xi
He, Ke-Lun
Hao, Jun-Hong
ENERGY, 2020, 194
[46] Design optimization of a new supercritical CO2 single reheat coal-fired power generation system
Tong, Yongjing
Duan, Liqiang
Yang, Ming
Pang, Liping
ENERGY, 2022, 239
[47] Supercritical CO2 cycles for power production
Laumb, Jason D.
Holmes, Michael J.
Stanislowski, Joshua J.
Lu, Xijia
Forrest, Brock
McGroddy, Mike
13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13, 2017, 114 : 573 - 580
[48] TURBOMACHINERY FOR SUPERCRITICAL CO2 POWER CYCLES
Fuller, Robert
Preuss, Jason
Noall, Jeff
PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 5, 2012, : 961 - 966
[49] Effect of impurity on the corrosion behavior of X65 steel in water-saturated supercritical CO2 system
Sun, Chong
Wang, Yong
Sun, Jianbo
Lin, Xueqiang
Li, Xueda
Liu, Huifeng
Cheng, Xiangkun
JOURNAL OF SUPERCRITICAL FLUIDS, 2016, 116 : 70 - 82
[50] CO2 corrosion behavior of sensitized 304 and 316 austenitic stainless steels in 3.5 wt.% NaCl solution and presence of H2S
Javidi, Mehdi
Haghshenas, Seyyed Mohammad Saleh
Shariat, Mohammad Hossein
CORROSION SCIENCE, 2020, 163 (163)

← 1 2 3 4 5 →