Mechanical clinching process with preforming of lower sheet for joining aluminium and ultra-high strength steel sheets

被引：0
|
作者：
Abe Y. [1 ]
Mori K.-I. [1 ]
机构：
[1] Department of Mechanical Engineering, Toyohashi University of Technology
来源：
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 2021年 / 38卷 / 02期
关键词：
Aluminium sheets; Joining; Mechanical clinching; Ultra-high strength steel sheets;
D O I：
10.2207/QJJWS.38.89S
中图分类号：
学科分类号：
摘要：
The material flow in the mechanical clinching process with preforming of the lower sheet was improved to increase joint strength for joining an aluminium sheet and an ultra-high strength steel sheet. In this process, the material flow to the radius direction in the final compression increases due to the increased upper sheet material in the cavity of the preformed lower sheet, and then the interlock increases. Finally, the joint strength increases because of the increased interlock. © 2020 Japan Welding Society. All rights reserved.
引用
收藏
页码：89S / 92S
页数：3
相关论文
共 50 条
  • [21] Mechanical clinching with dies for control of metal flow of ultra-high-strength steel and high-strength steel sheets
    Abe, Yohei
    Saito, Takato
    Mori, Ken-Ichiro
    Kato, Toru
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2018, 232 (04) : 644 - 649
  • [22] Joining High-Strength Steel and Al6061 Sheet Using Hole Clinching Process
    Ahn, Nam-sik
    Lee, Chan-Joo
    Lee, Jung-Min
    Ko, Dae-Cheol
    Lee, Seon-Bong
    Kim, Byung-Min
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2012, 36 (06) : 691 - 698
  • [23] Processing, microstructures and mechanical properties of ultra-high strength steel sheet
    Chen, Liqing
    Huang, Jianguo
    Zhao, Yang
    Di, Hongshuang
    Zhu, Fuxian
    11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 84 - 89
  • [24] Combined process of hot stamping and mechanical joining for producing ultra-high strength steel patchwork components
    Mori, Ken-ichiro
    Kaido, Tomoya
    Suzuki, Yasutaka
    Nakagawa, Yuki
    Abe, Yohei
    JOURNAL OF MANUFACTURING PROCESSES, 2020, 59 : 444 - 455
  • [25] Plastic joining of ultra high strength steel and aluminium alloy sheets by self piercing rivet
    Mori, K.
    Kato, T.
    Abe, Y.
    Ravshanbek, Y.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) : 283 - 286
  • [26] Mechanical Clinching and Self-Pierce Riveting of Thin Three Sheets of 5000 Series Aluminium Alloy and 980 MPa Grade Cold Rolled Ultra-High Strength Steel
    Abe, Yohei
    Maeda, Takato
    Yoshioka, Daiki
    Mori, Ken-ichiro
    MATERIALS, 2020, 13 (21) : 1 - 22
  • [27] Joining of hot-dip coated steel sheets by mechanical clinching
    Y. Abe
    M. Kishimoto
    T. Kato
    K. Mori
    International Journal of Material Forming, 2009, 2 : 291 - 294
  • [28] JOINING OF HOT-DIP COATED STEEL SHEETS BY MECHANICAL CLINCHING
    Abe, Y.
    Kishimoto, M.
    Kato, T.
    Mori, K.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 291 - 294
  • [29] Ultra-high strength sheet steel property developments
    John G SPEER
    Emmanuel De MOOR
    David K MATLOCK
    BaosteelTechnicalResearch, 2010, 4(S1) (S1) : 45 - 45
  • [30] Shearing of ultra-high strength steel sheets with step punch
    Abe, Yohei
    Yonekawa, Ryuji
    Sedoguchi, Kyouhei
    Mori, Ken-ichiro
    PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018, 2018, 15 : 597 - 604
12345